Re: Viera 42 inch LCD,not firing up Looking for a bit of help ..
-----------------------
Diode test selected on fluke ..red to Centre lead black on outer leads
reads 300ohms initially then value rapidly increases til Open circuit .then stays there
til ,
reverse the leads and the opposite happens OC down to 185ohms ish .
this doesn't happen on the other 2 en220a's .
does this make sense ?
Chris
-----------------------
Diode test selected on fluke ..red to Centre lead black on outer leads
reads 300ohms initially then value rapidly increases til Open circuit .then stays there
til ,
reverse the leads and the opposite happens OC down to 185ohms ish .
this doesn't happen on the other 2 en220a's .
does this make sense ?

Chris
Comment