Announcement

Collapse
No announcement yet.

Replaced T-con board and now getting vertical lines

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • haron
    replied
    Re: Replaced T-con board and now getting vertical lines

    i have tv kdl46vl160 but i have picture vertical line help me

    Leave a comment:


  • capkid
    replied
    Re: Replaced T-con board and now getting vertical lines

    Yeah, you're most likely not going to find a replacement panel at a practical price these days. I got mine on eBay about two or three years ago, and it was for a smaller TV (26").

    Leave a comment:


  • tom66
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by shanusmarty View Post
    Thanks everyone for the inputs!
    where can i get a cheap replacement panel, in what price range ?
    Not economical - 90% the price of a new TV in most cases.

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by capkid View Post
    I'm going to say that you have a bad panel. I've worked on several TVs that showed vertical lines that would gradually fill the screen. I found a cheap replacement panel for one of those TVs, and it's worked fine for about two years.
    Thanks everyone for the inputs!
    where can i get a cheap replacement panel, in what price range ?

    Leave a comment:


  • capkid
    replied
    Re: Replaced T-con board and now getting vertical lines

    I'm going to say that you have a bad panel. I've worked on several TVs that showed vertical lines that would gradually fill the screen. I found a cheap replacement panel for one of those TVs, and it's worked fine for about two years.
    Last edited by capkid; 06-15-2013, 01:55 PM.

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    they are very less at starting and grow more.. then fill up.. then very light when the cfl is on full brightness.. u can see the full video.. in my earlier post

    Leave a comment:


  • capkid
    replied
    Re: Replaced T-con board and now getting vertical lines

    This is purely unscientific, but Sony LCD TVs are notorious for panel and main board issues. If you've tried a known working main board, you probably have a bad panel. Do the vertical lines on the screen in your pic show up like that when it's first turned on, or do they gradually appear?
    Last edited by capkid; 06-15-2013, 10:20 AM.

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    If you tried a good mainboard & Tcon then it may be the panel
    their may be a fuse on the Tconn did you check
    Last edited by 1supertech; 06-15-2013, 10:04 AM.

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    i have checked by replacing the main board once.. the results were same!

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by shanusmarty View Post
    sir if the main board is bad(faulty), can the tv function properly ?
    all buttons and sounds working good!
    I would say so but I could be wrong may be someone else out their with more TV experience can suggest some more ideas?
    Last edited by 1supertech; 06-15-2013, 06:06 AM.

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    Here is a cheap capacitance meter
    http://compare.ebay.com/like/1308375...Types&var=sbar

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by 1supertech View Post
    Even thou it may look like it's bulged in the picture and it's not
    capacitors don't have to bulge to be bad I test all my caps to find a problem
    sir if the main board is bad(faulty), can the tv function properly ?
    all buttons and sounds working good!

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    Even thou it may look like it's bulged in the picture and it's not
    capacitors don't have to bulge to be bad I test all my caps to find a problem

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    and if main board is at fault, can the tv switched on, and all sounds and buttons are working fine ?

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    but they are not bulged, though it may seem in the pic!

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    You would need a ESR meter that is capable of testing on board or take them out to test.

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by 1supertech View Post
    I put red circles around caps
    ok i located, how can it be checked?
    i have a multi meter, i checked , they have continuity with out power!

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by shanusmarty View Post
    sir can u mark it out in the pic and attach the pic ?

    but i think the main board is working fine, coz there is sound and the buttons and remote is functioning well..
    need your suggestions ?


    ok i located, how can it be checked?
    i have a multi meter, i checked , they have continuity with out power!
    I put red circles around caps
    Attached Files

    Leave a comment:


  • shanusmarty
    replied
    Re: Replaced T-con board and now getting vertical lines

    Originally posted by 1supertech View Post
    fourth pic of main board polymers caps look like they are starting to bulge 100uf 6.3v & 47uf 16v
    sir can u mark it out in the pic and attach the pic ?

    but i think the main board is working fine, coz there is sound and the buttons and remote is functioning well..
    need your suggestions ?


    ok i located, how can it be checked?
    i have a multi meter, i checked , they have continuity with out power!
    Last edited by shanusmarty; 06-15-2013, 05:19 AM. Reason: located

    Leave a comment:


  • 1supertech
    replied
    Re: Replaced T-con board and now getting vertical lines

    fourth pic of main board polymers caps look like they are starting to bulge 100uf 6.3v & 47uf 16v

    Leave a comment:

Working...
X