Sanyo 32 inch Vestel clone (17MB22 chassis)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #1

    Sanyo 32 inch Vestel clone (17MB22 chassis)

    Another piece of Vestel trash.

    Intermittently getting stuck in standby.

    Two 15n caps on PSU failed. Replaced them with some dodgy ones, worked a little better - but need to find proper replacements.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.
  • gilly1984
    Badcaps Veteran
    • Jun 2012
    • 751
    • UK

    #2
    Re: Sanyo 32 inch Vestel clone (17MB22 chassis)

    Originally posted by tom66
    Another piece of Vestel trash.

    Intermittently getting stuck in standby.

    Two 15n caps on PSU failed. Replaced them with some dodgy ones, worked a little better - but need to find proper replacements.
    What is 15N? Is that 1500uf? Or am i miles away.
    Do NOT touch heatsinks when testing for voltages as they may be LIVE!

    Comment

    • vinceroger69
      Badcaps Legend
      • Mar 2012
      • 6714
      • uk

      #3
      Re: Sanyo 32 inch Vestel clone (17MB22 chassis)

      .015 uf i think

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Sanyo 32 inch Vestel clone (17MB22 chassis)

        Vince is correct... tiny caps on primary of SMPS. Half-bridge SMPS I think. The caps fail. The symptom is getting stuck in standby, or no picture but audio, or flickering backlight... all caused by low 24V (measured 22V at one point...)
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Related Topics

        Collapse

        Working...