LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • SlickClick
    Senior Member
    • May 2011
    • 91
    #21
    Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

    All you need is the socket clamp..? hmmm i got a few panisonic y-buffers i am going to list tomarrow most likely on ebay... im selling them cheap cause the y-main has outdoor rot some resistors are falling apart but the buffers might actually be good either... i think the are 1080p buffer so im not sure if the clamp would be the same... you might be able to use any sockets clamp as long as its the same socket and pin count... you might even be able to heat gun it off maybe... LoL it is plastic; maybe UV it off..? it needed...

    edit: the pani's flip over type... not sure if i have any might have a fried set of lj92s but thats about it...
    Last edited by SlickClick; 05-03-2014, 08:09 PM.

      Comment

      • martino
        Not so "senior"
        • Aug 2013
        • 997
        • canada
        #22
        Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

        I have a couple 50hp66 sitting here,let me check in the morning....How fast you need them,I'm in Canada
        Proud owner of dozens of broken TV's and many,many,many boards.


        Our website and passion:http://hollenhundshepherds.com/

          Comment

          • tw2005
            Badcaps Legend
            • Oct 2011
            • 6458
            • Australia
            #23
            Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

            Originally posted by martino
            I have a couple 50hp66 sitting here,let me check in the morning....How fast you need them,I'm in Canada
            Ah,....... Thanks but no longer needed. Old post that SlickClick has revived

              Comment

              • SlickClick
                Senior Member
                • May 2011
                • 91
                #24
                Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

                CORRECTION:cliff_hootarski thread hijacked it from the dead...

                Originally posted by cliff_hootarski
                Quick question, anybody have the two ribbon cables that connect the upper buffer board to the Ysus and between the two buffer boards?

                I've misplaced mine and I need them to finish repairs.

                How much, if you have them?

                Thanks.

                The buffer boards can be found in many model TV's:

                Hp
                PL5060N
                Lg
                50PY2DR 50PY2DR-UA AUSYLAD50PC1DR-UA SUSLLJR50PC1DRA-UA SUSLLJR50PC3D-UC 50PC3D-UD AUSLLHR50PC3D-UE AUSLLMR50PC3DH-UD AUSLLH50PM1M-UC SUSLLJR50PX1D-UC 50PX1D 50PX1DH-UC AUSYLAD50PX2D-UD 50PX2DC-UD SUSLLBR50PX4D-EB 50PX4DR-UA A850PX5D-UB SUSYLBR
                Maxent
                MX-50X3 MX-50X5 P500150X3
                Pelco
                PMCP650
                Philips
                BDH5021V/27
                Polaroid
                PLA-5048
                Sony
                FWD-50PX2 FWD-50PX3
                Toshiba
                50HP16 50HP66
                Vizio
                P50HDM P50HDTV10A P50HDTV20A VP50HDTV20A
                Zenith
                Z50PG10-UA Z50PX2D

                  Comment

                  • tw2005
                    Badcaps Legend
                    • Oct 2011
                    • 6458
                    • Australia
                    #25
                    Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

                    no worries, that explains it.

                      Comment

                      • martino
                        Not so "senior"
                        • Aug 2013
                        • 997
                        • canada
                        #26
                        Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

                        Early in the morning and now I'm confused. Haha....
                        I will read this again after my coffee and/or wait if the person responds if he's still in need of stuff lol. Hmmm.... Coffee with baileys???
                        Proud owner of dozens of broken TV's and many,many,many boards.


                        Our website and passion:http://hollenhundshepherds.com/

                          Comment

                          • cliff_hootarski
                            Badcaps Veteran
                            • Jul 2006
                            • 411
                            • USA
                            #27
                            Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

                            Yes, I indeed did resurrect this one. Probably should have started my on thread.
                            Anyone have those ribbon cables?

                            I'm located in Oklahoma City, OK.

                              Comment

                              • martino
                                Not so "senior"
                                • Aug 2013
                                • 997
                                • canada
                                #28
                                Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

                                sry,all my matching TV's had Yboards and buffers stripped out of it already
                                Proud owner of dozens of broken TV's and many,many,many boards.


                                Our website and passion:http://hollenhundshepherds.com/

                                  Comment

                                  • cliff_hootarski
                                    Badcaps Veteran
                                    • Jul 2006
                                    • 411
                                    • USA
                                    #29
                                    Re: LG 50px5d and others Buffer boards. 6871qdh089a, 6871qdh088a

                                    Thanks for checking.

                                      Comment

                                      Previous 1 2 template Next

                                      Related Topics

                                      Collapse
                                      • howardc64
                                        TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                                        by howardc64
                                        All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                                        • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                                        • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                                        ...
                                        07-24-2025, 05:17 PM
                                      • howardc64
                                        A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                                        by howardc64
                                        Problem

                                        This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                                        08-04-2024, 10:36 PM
                                      • Yanleb
                                        Schematic or datasheet for Plasma TV buffer chip
                                        by Yanleb
                                        Hi all,

                                        I'm interested in understanding how a buffer board chip is working. I know there's about 90 outputs per chip to the plasma panel, but I'm more interested to know about the input pins. I guess that some of them are address pins, but I want to know more.

                                        So far I've found nothing at all. I haven't found any datasheet about the various buffer chips, and I haven't found any schematic for the buffer board using them (Y Buffer Board in Samsung's terminology).

                                        Any information will make me happy. It can be from any buffer chip or plasma TV manufacturer....
                                        05-18-2022, 01:36 PM
                                      • legg
                                        LG 42PC3 buffer output doesn't follow YSUS
                                        by legg
                                        LG42PC3D -UD originally with green lamp but no display or audio.
                                        Owner says was working, then went 'pop'.
                                        All 5V caps bulging. replaced.
                                        All PSU output voltages within spec but -Vy is low on YSUS.
                                        One of three parallel fets between SUS_OUT and SUS_DN is zenering,
                                        eventually shorts DG. Replaced all 3 - -Vy now OK.

                                        Y scan buffer test point does not follow YSUS output below -50V

                                        Note: This unit seems to expect YSUS output to park at -Vy in between
                                        drive signal pattern periods. A replacement drive signal board confirms this....
                                        11-18-2021, 11:49 AM
                                      • howardc64
                                        Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
                                        by howardc64
                                        • Prior owner tried a replacement main board. No difference.
                                        • Samsung 2x red blinking standby LED = panel fault
                                        • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
                                        • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
                                        • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
                                        ...
                                        07-19-2025, 10:54 PM
                                      • Loading...
                                      • No more items.
                                      Working...