Hello everybody.
Got a problem with my rca plasma. came in the room with the tv on and found the picture was dead on the tv. sound was still working. with some help(service manuals) from Tom66 . thought i would try and fix it myself.
First off, when you plug the power into the tv, when it was working and i hit the power swich and you would hear one click from the power relay and the picture would come up. Now when i turn the power on, its one click, the several clicks on & off.
I checked for operating voltages at connector(cn804, to the y-main board) but no voltage present except the 15 volt.
I can pull this plug and it goes back to one click from the power relay, not sure if this means anything or not was going by the troubleshooting guide.
I did manage to find a component on the y-buffer board that appeared to be burnt,
im at a stand still now any help would be appriciated.
Thank you in advance.
Got a problem with my rca plasma. came in the room with the tv on and found the picture was dead on the tv. sound was still working. with some help(service manuals) from Tom66 . thought i would try and fix it myself.
First off, when you plug the power into the tv, when it was working and i hit the power swich and you would hear one click from the power relay and the picture would come up. Now when i turn the power on, its one click, the several clicks on & off.
I checked for operating voltages at connector(cn804, to the y-main board) but no voltage present except the 15 volt.
I can pull this plug and it goes back to one click from the power relay, not sure if this means anything or not was going by the troubleshooting guide.
I did manage to find a component on the y-buffer board that appeared to be burnt,
im at a stand still now any help would be appriciated.
Thank you in advance.
Comment