Need Help Finding Caps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • knoxrebel
    Senior Member
    • Oct 2009
    • 168

    #1

    Need Help Finding Caps

    i have a tv that needs some new caps for the power board. Badcaps is out of the 3300uf at 10 & 16v and wont restock for a while. Where can i get these? I have checked digikey and found a huge list, but im not sure what product series i need to be looking at for each manufacturer.

    Thanks in advance.

    EDIT : I need two 3300 @ 10v (10mm X25)
    two 2200 @ 10v (10mm X 25)
    four 680 @ 35v (10mm X 25)


    Im looking at these part numbers

    EEU-FR1V681L
    EEU-FR1C222
    EEU-FR1A332
    Last edited by knoxrebel; 08-09-2011, 06:04 PM.
  • PlainBill
    Badcaps Legend
    • Feb 2009
    • 7034
    • USA

    #2
    Re: Need Help Finding Caps

    Originally posted by knoxrebel
    i have a tv that needs some new caps for the power board. Badcaps is out of the 3300uf at 10 & 16v and wont restock for a while. Where can i get these? I have checked digikey and found a huge list, but im not sure what product series i need to be looking at for each manufacturer.

    Thanks in advance.

    EDIT : I need two 3300 @ 10v (10mm X25)
    two 2200 @ 10v (10mm X 25)
    four 680 @ 35v (10mm X 25)


    Im looking at these part numbers

    EEU-FR1V681L
    EEU-FR1C222
    EEU-FR1A332
    I don't know why you are asking for help, you seem to have done very well on your own. Those should be excellent replacements. I note that you have selected a 2200uF, 16V cap, not a 10 volt as you mentioned above.

    If you are seeking validation for your efforts, here it is "You did very well".

    PlainBill
    For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

    Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

    Comment

    Related Topics

    Collapse

    • momaka
      Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
      by momaka
      I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

      For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

      https://www.badcaps.net/filedata/fetch?id=3591771


      https://www.badcaps.net/filedata/fetch?id=3591772

      It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

      https://www.badcaps.net/filedata/fetch?id=359177...
      03-12-2025, 03:42 PM
    • eryjus
      Heathkit IO-4205 Power Supply Caps
      by eryjus
      Hello,

      First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

      I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

      I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
      ...
      05-10-2023, 11:21 AM
    • Paxman_Swede
      Identifying caps on an old Zoom 9000
      by Paxman_Swede
      Hello!

      I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

      The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

      I have studied the board and...
      01-14-2025, 09:51 AM
    • fl0w
      GeForce 6800GT recap, need help identifying caps and finding replacements
      by fl0w
      Hi,

      I just noticed that my Asus V9999GT (GeForce 6800 GT) had some swelling capacitors. I managed to identify the brown ones, which are Nippon Chemi-Con KZG series, 6.3V 820µF, which I plan to replace with this.
      But for the yellow ones, I guess these are Fujitsu caps, without being able to identify which series... A picture of the video card is attached to the topic.

      I need to replace:
      • 2x 2.5V 1500µF => I plan to use this
      • 2x 16V 330µF=> I plan to use this
      • 1x 6.3V 680µF=> I plan to use this
      Am I correct with the cap choices?

      Thanks for...
      10-02-2024, 11:28 AM
    • captain150
      Help with switching power supply caps
      by captain150
      I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
      I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
      03-16-2025, 07:34 PM
    • Loading...
    • No more items.
    Working...