Philips plasma 50PF7320/10, display problem

[epod]

Re: Philips plasma 50PF7320/10, display problem

Hi plainbill thanks for reply i know nothing about electricals but i am trying its the 50"v4 version i changed two capasitors 10v 3300uf 105oc but still nothing the three smd ics u r on about r there on main board naerer the two 8001 8002 leds thanks



epod

[PlainBill]

Re: Philips plasma 50PF7320/10, display problem

Hi plainbill thanks for reply i but i am trying its the 50"v4 version i changed two capasitors 10v 3300uf 105oc but still nothing the three smd ics u r on about r there on main board naerer the two 8001 8002 leds thanks



epod

If you "know nothing about electricals" you better turn the repair over to someone who does. At a MINIMUM this repair requires someone who knows how to remove and replace SMD ICs. The ICs I was referring to are on the Small Signal board, not the power supply.

PlainBill

[epod]

Re: Philips plasma 50PF7320/10, display problem

i agree i have no electric skills but i need to try i can solder. or shall i look for new board whats the board called any help thanks is there a way i can test this board