Hello brother .
I have pb with my printer canon lbp 6030 .
Pb with connection usb
I have pb with my printer canon lbp 6030 .
Pb with connection usb
-
-
Re: Canon lbp 6030
tryLast edited by SMDFlea; 04-23-2022, 04:03 AM. -
Re: Canon lbp 6030
Merci mais le problem percisteComment
-
SOLVED. I removed the printer in settings, replugged and let it reinstall and it worked this time.
Brother HL-2140 laser printer
Windows 10
Attempt to print and immediately get a Windows pop-up saying "Error printing". The document appears in the printer queue window with Status "Error-printing".
Turned off printer. Unplugged, waited, replugged. Ran the Windows troubleshooter. Removed and reinserted toner cartridge. Checked for paper jam. No printer error lights. Reinstalled driver. Restarted the Spooler service. Rebooted...06-22-2023, 11:11 PM -
I got this broken printer from my brother who got it from the street. He asked me to help to fix it.
I need help on fixing this machine.
Issues/Observations:
1) When connected to power, it's not working. Only showing blinking screen on the LCD. See pics 1 and 2. It is blinking every 2 seconds.
2) I pressed the buttons on the control panel to see if there is any response. The "Options" button can turn off the LCD screen, and then press hold the power button for about 1 second can turn the blinking screen back on again. Other than... -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
Hello guys,
Does somebody has this dump for printer canon G3430
Thank you in advance -
Hello,
My friend brought his MFC-5895 for repair. Same problem "No ink in the ink tubes". Quick FIX when you have 3D printed parts.
But his printer has this problem of only printing in Unidirectional mode, else the text is blurry.
All service manual adjustment done and make no difference.
timing strip is OK
See nozzle check is also out of alignment.
...12-27-2024, 05:34 AM
Comment