Hi friends.
Got the CM1100adw color printer and delighted at the prospect of being able to break-free from this "chip" on inks/toners!!!
Read many posts on topic.. wondering if someone can help:
Assuming i'd want to do myself, is it possible to read/dump firmware from USB port, or that requires breaking down the printer and connecting to PCB?
Also, not sure how to determine if the bootloader is locked or not..
If there's a "guide" or links, do send here or in PM..
Thanks in advance!
Got the CM1100adw color printer and delighted at the prospect of being able to break-free from this "chip" on inks/toners!!!
Read many posts on topic.. wondering if someone can help:
HTML Code:
Firmware Version: 3.E.1.2 Engine Version: 1.0.6.8
HTML Code:
Q044RlYwMDA3Rzo6MzExMjAwMEY6OkFDOkM1OjFCOjUxOkJCOjVFOjozLkUuMS4yJFNJRzQwMDhmYzZmYjgxNDU1MWMwZTJiMTkxZjM1ODkyNGUzOjpCdWlsZHRpbWU6IFRodSAxOSBTZX AgMjAyNCAxMToyOToxMCBBTSBDU1Q6OjEwMjQ6OkNNMTEwMEFEVwA6OjEuMC42LjgAOjo1Ljg6Og==
Also, not sure how to determine if the bootloader is locked or not..
If there's a "guide" or links, do send here or in PM..
Thanks in advance!