Hi po.. can you please share a file eeprom bios for this printer. i need the back and front bios file please.. help me..
-
-
Re: CANON PIXMA MG3070s FIMRWARE NEEDED
Bumping this thread for update -
Re: CANON PIXMA MG3070s FIMRWARE NEEDED
is there any update on this, i also neededComment
-
Re: CANON PIXMA MG3070s FIMRWARE NEEDED
any update?.. thanks!..Comment
-
Re: CANON PIXMA MG3070s FIMRWARE NEEDED
Does anybody still need the firmware?Comment
-
Re: CANON PIXMA MG3070s FIMRWARE NEEDED
Here are the eeprom dumps in case anybody needs it.Comment
-
Working for my Mg3070s.thanks!Comment
-
thank you working for my unit.Comment
-
using this bin file , password of my printer is the same when connecting to wifi direct connection?Comment
-
Please I need help
I Need top and bottom bin file for my mg3070s
Comment
-
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)... -
Hello, does anyone here have a backup eeprom bin file for Canon E400 & E470 printer? Thanks. -
Hello, does anyone here have a backup eeprom bin file for Canon E410 printer? Thanks.
-
hello guys maybe you can help me i need eeprom bin for Canon Pixma E470 for the 2 IC's (IC401 and IC402)
Comment