asiart
Member
Last Activity: 07-19-2024, 03:53 AM
Joined: 01-10-2023
Location: Sungai Petani Kedah
-
Hi, this is the picture. The burned one. At R51...
Leave a comment:
-
Thanks, i'm sorry, I forgot to attached the picture. The burned part is R51 at your picture....Leave a comment:
-
Epson L3210 Power Supply
Hi, I need resistor value at R51 mark at Epson L3210 Power Supply. The model of PSU is Model EPS-167E. R51 is burn, so I didn't get the value. Thanks. -
thanks. it work fine. -
HP Pavilion 14-BF015TX
Hi, this laptop before is F.03 Bios before I update it to the latest download from the HP website is F.47 Rev.A. I update it because want to update the battery not detect. Right now the problem after I update the bios. It can on, and no display. Just now I on it and it show 5 long beeps and 3 short beeps.
Laptop Model is: HP Pavilion 14-bf015tx
Model: 7265NGW
SN: CND7287JL0
Motherboard Model: DCM40 LA-F031P REV:1.0
Old Bios I cannot provide it because it already flash with the new bios.
I will provide the new dump for it. It's the new bios F.47...Last edited by asiart; 01-05-2024, 10:20 PM. -
Oh I see, I already found the broken piece of the mosfet. It wrote JCS4N65MF. Search it online and no hope. I tell my boss, and they told me to stop repair those monitor because they want to scrap it. If I want to replace the mosfet, did I need to search for other mosfet that same with these mosfet datasheet? Thanks for the reply. -
I’m sorry for not include photo yesterday. Now i’m will give you the pictures. Thank you.Leave a comment:
-
Dell E2016HV no power.
Hi, I want to ask about the mosfet value of this power supply. The mosfet is blown. The psu model is ILPI-354 V.A. Need urgently. Thanks.Last edited by asiart; 12-22-2023, 04:34 AM. -
Dell E2016HV no power.
Hi, I want to ask about the mosfet value of this power supply. The mosfet is blown. The psu model is ILPI-354 V.A. Need urgently. Thanks.Last edited by asiart; 12-22-2023, 04:34 AM. -
Re: Canon g1000 to g4000 series resetter
You can reset it without using the resetter. Turn on the printers in service mode, and press the stop reset button 5 times, then press the power button 1 time. It will reset the printer. If the printers can go into service mode, you press the reset button 5 times, the light not responding. You need to use the resetter. I already try it many times, it's work fine.
You can search youtube or google if you don't know to turn on the printer in service mode.
The method that I used, also worked in G2010-G4010 series.Leave a comment:
-
Re: Asus P8H67-M LE Rev3.00
already reflash it, same problem. btw, customer don't want to repair it. thanks for the suggestion.
Oh, okay sir. Thanks for the reply. Customer don't want to repair it.
Already replaced the PSU, same problem. And all power connections are secured. Customer don't want to repair it. Thanks for the reply....Leave a comment:
-
HP Laserjet M1132 MFP Power Supply
Hi, does anyone know about this resistor value at R216? I think it's red, red, silver and gold maybe. Or does anyone have the same psu board number? The psu board number is RM1-7902.
Does the board design same with Canon LBP6000? Because last time I replaced the resistor using the same color and the printer can power on.
I will attached it below. Thanks.... -
Asus P8H67-M LE Rev3.00
Hi, I have a problem with this Desktop motherboard, when I want to turn it on, it goes off within a second. When I hold the MemOK! button, it goes on for quite a while. If I release the MemOK! button, it's straight goes to off. What do I need to check first? I already reset the cmos, change ram and take out the CPU, the problem is still there. Thanks
-
Canon E400 & E470 Printer Dump file
Hello, does anyone here have a backup eeprom bin file for Canon E400 & E470 printer? Thanks. -
Re: Canon E410 Printer Dump file
Thanks
...
Leave a comment:
-
Canon E410 Printer Dump file
Hello, does anyone here have a backup eeprom bin file for Canon E410 printer? Thanks. -
Re: Need Dump Canon E480.
thank you, I already got the the dump. And the board number is QM7-4181. I will attach the dump here. Thanks....Leave a comment:
No activity results to display
Leave a comment: