Got this media receiver in a few months back finally decided to upload the repair log and make a thread pon the repair. The original fault was stuck in stndby/no power. Upon opening the cases I found:
1* 1000uf 35v Capxon Gl failed
2* 100uf 50v Capxon Gf failed
Shorted Zenner diode on the feed back circuit for the 35v B+ audio rail causing its coupling caps to blow out.
Sorry for the bland thread, video explains all link to video of repair explaination:
https://m.youtube.com/watch?v=pM1mgs1yBBc
1* 1000uf 35v Capxon Gl failed
2* 100uf 50v Capxon Gf failed
Shorted Zenner diode on the feed back circuit for the 35v B+ audio rail causing its coupling caps to blow out.
Sorry for the bland thread, video explains all link to video of repair explaination:
https://m.youtube.com/watch?v=pM1mgs1yBBc
Comment