Hello,
I am not well versed with Plasma's but I am hoping someone can point me in the right direction.
I have a 50 inch plasma that is about 5 years old. Recently it started this thing where when turned on the green light would show but no picture. Then if I turned it off an then on all is well picture sound everything.
The problem has progressed now though and it is rather annoying. Now when I turn the T.V. on I get green then red. Press power again and the same thing. After a number of cycles it finally goes green then blinks green and turns off after about a minute. The next press of the power button turns the TV on and everything works. When the on/off thing started it was about 5 cycles before the TV would turn on. Now it takes about 20-40 cycles depending on the day and I believe how long the set has been off for before it turns on and works. If I shut the TV off after a show or something then turn it on within an hour or so it just comes on with no trouble.
I have not tried to much to TS this set other than disconnecting power briefly but that has no effect. I have not tried 24 hours or anything. I will try replacing the power cord tonight but I am hoping someone has some ideas. It seems like maybe the power supply is not getting enough juice to fire up the set. For now I just hand the remote to my 5 year old and have him go to town on the power button till it stays on.
Any Help would be appriciated
I am not well versed with Plasma's but I am hoping someone can point me in the right direction.
I have a 50 inch plasma that is about 5 years old. Recently it started this thing where when turned on the green light would show but no picture. Then if I turned it off an then on all is well picture sound everything.
The problem has progressed now though and it is rather annoying. Now when I turn the T.V. on I get green then red. Press power again and the same thing. After a number of cycles it finally goes green then blinks green and turns off after about a minute. The next press of the power button turns the TV on and everything works. When the on/off thing started it was about 5 cycles before the TV would turn on. Now it takes about 20-40 cycles depending on the day and I believe how long the set has been off for before it turns on and works. If I shut the TV off after a show or something then turn it on within an hour or so it just comes on with no trouble.
I have not tried to much to TS this set other than disconnecting power briefly but that has no effect. I have not tried 24 hours or anything. I will try replacing the power cord tonight but I am hoping someone has some ideas. It seems like maybe the power supply is not getting enough juice to fire up the set. For now I just hand the remote to my 5 year old and have him go to town on the power button till it stays on.
Any Help would be appriciated
Comment