Hi does anybody have the fujitsu t730 boardview, i need to trouble shoot a board that only receives about 1.5v from input but the power supply is on 19v
thanks in advance
thanks in advance
-
Hi,
I have a Fujitsu Lifebook E547 vPro that does not boot anymore after Windows Update tried to install a new Bios version. Screen stays black no post - only the numblock light blinks.
What I've tried:
I have used my CH341A to read the bios chip (25Q128FVSQ) (Dump attached) - I think the dump is "good" because I could find the Serial number in the data and also the Winkeyfinder found a windows key.
for the lack of any other Idea I took the bios from this post (https://www.badcaps.net/forum/troubl.../troubleshooti... -
I would like to request an very rare Fujitsu server D3445-K12 or K11 motherboard schematic or boardview, It is from Kuka Robot control KRC4
(Skylake 6th gen, H110)
It has 27V power circuit SMD DC-DC ->12->5->3.3V
Maybe the simple D3445-S is same like file but missing not mounted 27V circuit, but some parts same like.
(Skylake 6th gen, H110)
thanks...07-26-2024, 12:19 PM -
Fujitsu Lifebook AH53/X FMVA53XBKS
Specs: Intel i7 processor, 8Gb ddr4 memory module, 250Gb SSD,
date stamp is 2016
Motherboard model: ADZAM-6050A2761701-MB-A01
Symptoms: Sometimes the unit will turn on made it to the windows login screen then turns off, most of the time the Unit can be turn on but only the power on is lit and will eventually turn of in less than 30 seconds, CPU fan spins, no beep code and no display.🤕🤕🤕
Basics: replaced known good 19v adapter, replaced known good ddr4 memory module, test the always on voltage 5v, 3.3v all... -
Hi, anyone have schematics or boardview for Fujitsu H760, motherboard no. CP714673-01
thanks
11-12-2023, 01:08 AM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...