Any one has X330FA / S330FA boardview please!! I already have schematic https://www.badcaps.net/forum/attach...1&d=1659190720
just need boardview please.
just need boardview please.
-
Hello everybody,
I have the schematics already of this device but no boardview and it is being very difficult to locate the fault.
I have +3P3VAS but then nothing else, I suspect something related with 1V8 regulators, but without boardview it is very difficult to locate those components and or pads to test.
Does somebody has the boardview of this model? Or can point out where to test?
Thanks!05-12-2025, 03:29 AM -
If anyone has the boardview and can share I would greatly appreciate it! I have the repair guide, but I still need the boardview. My BMC cannot initialize, likely due to damage around the enable switch....
-
Hi guys, I have a problem with my laptop which is MSI GF66-11UE. 3-4 days ago I wanted to change thermal paste,unfortunately one of screw was become stripped and I forced a little bit that screw.Anyways when I finished the change of thermal paste and picked up the laptop at last I realized that I didn't put the edp connector inside but the problem is I put this while the battery was still connected the motherboard.That caused a few sparks.
Fortunately, the laptop booted up afterward. However, it was running using the CPU's integrated graphics, and it didn't detect the dedicated... -
Have somebody please iphone 12 mini boardview with component codes that are same like in schemas ? I need at least a picture of caps around nand. Or is there a way of "pairing" a component code from boardview with schemas ? I have boardview file from that large XZZ dump what can you find in this forum.02-20-2025, 04:37 PM -
Hello everyone,
I have a Samsung Galaxy S7 (SM-G930F) that's not powering on, and I want to try to repair it. I'm not a repair professional and while I have learned quite a lot in the past two months when I started to learn and gather equipment, supplies and information, I still have plenty more to explore and much more to learn.
So I was looking for the boardview file for this phone the other day, and I thought found it on another site. I actually had to pay for it. I paid for both the BVR and the BVRE version. Then I found this site, and the same files can be downloaded...
Comment