Lenovo U160 LU16 09938-1 48.4JB01.011 Im looking for this schemtic of the board, Hope someone has one please share , unit will turn on then off before you can install operating system
Request Lenovo U160 schematic
Collapse
X
Related Topics
Collapse
-
Lenovo 3000 Series Schematic
Lenovo 3000 was a line of low-priced notebook and desktop computers designed by Lenovo Group targeting small businesses and individuals. It was replaced with the IdeaCentre and IdeaPad brands.
3000 C100 laptop with Braille keyboard
Lenovo 3000 C
C100, C200 - 15-inch XGA screen
Lenovo 3000 N
N100, N200 - 14.1-inch- and 15.4-inch- WXGA models
N500 - 15.4 inch screen.
Lenovo 3000 V
V100, V200 - 12.1-inch WXGA models
Lenovo 3000 G
G400, G410, G430, G450, G455, G510, G530, G550, and G560...-
Channel: Schematics and Boardviews
10-04-2024, 06:05 AM -
-
by philou66Hi! I'm looking for schematics of Lenovo P1 Gen6 or Gen7 schematics.
Or any hints about the SMBUS pins of the M.2 sockets.
It seems that contrary to lots of other computers, these pins are actually connected to something! However I don't manage to talk to this bus using i2cdetect (or i2c_read/write)
There might be some multiplexing occuring to avoid addess collision on both M.2 buses, so I hope that the schematic could give me additionnal info.
Thanks !...-
Channel: Schematic Requests ONLY!
02-03-2025, 05:01 AM -
-
by JayFixesITHello,
Im looking for the schematic and boardview for Lenovo Legion S7 16ARHA7.
Thank you in advance-
Channel: Schematic Requests ONLY!
-
-
by PaffoHi,
i have a S940 with a damaged screen cable, one of the pins on the flat is broken, i want to scratch the cable and hard wire it.
Could anyone please provide me with a Boardview and Schematic?
Code on the board is LS40 18A82-1, this one: ...-
Channel: Schematic Requests ONLY!
05-29-2025, 03:14 PM -
-
by Tommy LaiHi Folks anybody have a schematic for a Lenovo ideacentre 310s? Board model number is FT4STMS
Currently facing a no power issue with the board however under thermal cam, the ethernet chip is heating up. 20V coming in correctly 3.3V & 5V
Any help would be greatly appreciated-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Comment