CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
Dear All,
Please share the schematic for Dell mother board,
Board ID -CAL60 LA-F114P Rev: 1.0 (A00)
Thank you.
Please share the schematic for Dell mother board,
Board ID -CAL60 LA-F114P Rev: 1.0 (A00)
Thank you.
-
Last edited by NiroPall; 03-04-2021, 05:28 AM. -
Re: CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
Dear all,
Any one have this schematic,
Thanks. -
Re: CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
Is still not available?
Share please.Comment
-
Comment
-
Re: CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
Thanks a lot broComment
-
Re: CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
Thank youComment
-
Re: CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
thank you very muchComment
-
Re: CAL60 LA-F114P Rev: 1.0 (A00) Schematic needed
The rar file posted contains "Dell Inspiron 5570.cad", which I cannot open using Allegro Free Physical Viewer 22.1. The program says that the cad file is corrupted.
The Allegro viewer can open LA-F115PR10-0728D_Gerber.brd just fine, but not the cad file.
Is there another viewer I should be using?
Thank youComment
-
dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad -
Dynabook Satellite Pro L40-G-102 Schematic Needed. -
Hello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at... -
Hello,
I need your help finding the MSI GF63 12UDX (Board MS-16R81 VER_2.0) schematic.
I accidently inserted MSI USB a programmer that was connected to a board that has Neutral tied to GND, instead of connecting it to the USB-ISO that was on another port (Friday afternoon mistakes....).
Now it doesn't start. 😏
I've looked for burned parts but found none.
The 20V from the adapter are ok and the battery has 12V if I disconnect the battery plug.
I need the schematic to try to understand where there the problem may be or if it is repairable.
Thanks!... -
Sir ,
I need the schematic of h61m-s rev1.1 gigabyte motherboard.
Recently this board came to me for repair but could not find its schematic .
The problem of this board is no display but the board has a power on it .Processor is not heating .
For preliminary investigation i changed vga cable ,ram and processor but the same issue persist.
Whenever i switch on the motherboard monitor says NO SIGNAL .
The board is almost new .No sign of corrosion on the board seen .
...
Comment