well anyone got this schematic ? if so i apreciate if you can share 
thk in advance
thk in advance
-
-
Re: Bios Dump Easynote MH36
not getting 5 volts on the main regulator , but once i inject 5 volts i notice that a small transistor PQ15 is getting hot ! need the schematic -
Re: Bios Dump Easynote MH36
board view here
https://www.elvikom.pl/schemat-packa...g-gl-t467.html
and schematics in attachmentIm Back... sort of...Comment
-
Comment
-
Packard Bell EasyNote SB85 SB88 MINOS-GP2W Laptop Schematic...10-17-2024, 08:49 AM
-
Packard Bell BV EasyNote ML65 Laptop Schematic...10-04-2024, 04:05 AM
-
Packard Bell TS11 Laptop Schematic
LA-6901P...10-08-2024, 11:54 AM -
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
Comment