Hi everyone, I would like to request permission for acer 5742 schematic with the hope of repairing the motherboard, many thanks.
-
-
acer 5742 schematic
maybe that will help..Last edited by SMDFlea; 10-05-2019, 02:45 AM.Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.
-
Acer Aspire 5733 5742 5742Z Laptop Schematic
LA-6582P Rev 1.0...10-31-2024, 04:28 AM -
Acer Aspire 5742 5742G Laptop Schematic
LA-5893P... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hi, I am looking for schematics for an Acer Predator 17 G9-793-73A6?
I can not read the last digit, maybe 6.
In another topic I found a boardview that seems to match mine: Acer Predator 17 G9-793 - Pegatron MU5DC CH7DC BoardView
But in the same topic schematics don't match (both board view & mine) : Acer Predator 17 G9-793 - Pegatron MU5DC CH7DC REV 2.0
On this mainboard, the GPU is dead (shorted), but I am trying to have it booting without the GPU Nvidia, to disconnect GPU I have desolder 3 coils powering the GPU, and one bigger in upstream these 3.
Now it begin... -
Hi there all, Merry Christmas and Happy New Year!
Looking for advice, Need to restore/fix the damaged Acer Aspire 514 -54 power circuit pathways.
I am not good at reading schematics and have difficulty finding the board viewer schematic or simple schematic for damaged parts, but I have all the tools and experience for micro-soldering. All I need to figure out is which ends (from-to) and trace wires to restore lines.
Hope the pictureS are clear enough to see the problem...
Comment