Hi, Does anyone have, or know where I can locate a boardview file for a Dell Inspiron 15r 5537 i5. Motherboard is LA-9981P. Any help would be much appreciated. Thanks!
-
Hello everybody,
I have the schematics already of this device but no boardview and it is being very difficult to locate the fault.
I have +3P3VAS but then nothing else, I suspect something related with 1V8 regulators, but without boardview it is very difficult to locate those components and or pads to test.
Does somebody has the boardview of this model? Or can point out where to test?
Thanks!05-12-2025, 03:29 AM -
Hello, if someone have boardview for HP Pavilion 15 dk , marking on board is HP Pavilion 15 Compal FPC52 LA-H463P Allegro. I have schematics from HP Pavilion Gaming 15 GPC50 LA-J643P rev 1.0 and power button connector and transistor Q80 corresponds to my board and found one boardview file in cad format for LA-H462P and seems that its the same but I don't have actual traces inside or I don't know how to see that from this file.
...04-16-2025, 06:35 AM -
Hello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at... -
Asus TUF B360-PRO GAMING(WIFI) boardview needed, thanks ! -
Hello guys I'm new to board repair. I would like to primarily focus on PC boards, so I picked one up, but now can't find any documentation on it. I found one post with boardview on this forum but it is in a .fz format which my freeboardview program doesn't want to open.
If someone has a PDF of the schematics and the boardview .brd file I would greatly appreciate it.
Thanks!12-19-2024, 02:10 PM
Comment