schematic need
-
I am looking for schematic and component placement diagram for my hp victus 16 (i5 - 12500H version). Mainboard number is DAG3MCMBAE0 rev:E. After changing thermal paste, cpu fan starts spinning at high speeds even after cold boot. I can read cpu temperature by hardware monitor app and it is not high (about 40 celcius and fan is spinning loud.). I had checked the fan speed control pwm and see that it is constantly sweeping between %10 to %60 (sweeps 10% to 60% and tuns back to 10% and cycle continues in this pattern). I need schematic to troubleshoot. Any advice welcome.Today, 07:32 AM -
As per topic, please help identify this specific IC found on NB2686_V5 mainboard.
it bear a marking
JE
16
Please help, thanks in advance. -
Hi there,
First, I'm not sure it's the right section to post for this type of device, but could not think of something better.
Ok, so my son (a mechanic) bought a faulty Hofmann Geodyna 6300 wheel balancer (which appears to be mostly a re-branded Snap-on wheel balancer).
I'm looking for any resources (doc, manuals, schematics) that would be available for this device or anyone that would have any knowledge on this particular device (or its Snap-On equivalent).
I'm trying to diagnose the fault(s ?), but I can't find any schematic (appart from the... -
My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
since i couldn't find schematic or boardview for this model (LA-K062P), i use closest board model found here https://www.badcaps.net/forum/troubl...-and-boardview
the schematic share same marking for each component, using same PD-Controller, same BQ25710, the only different is the battery cell used. LA-K061P uses 3S battery while LA-K062P use 4S battery per schematic.
what i've done:
- flashing...
Comment