hi
I am looking for boardview for daog7hmb8g0 rev g
Any suggestions ? i found bios only on the forum
Thanks
I am looking for boardview for daog7hmb8g0 rev g
Any suggestions ? i found bios only on the forum
Thanks
-
Hello,
I have problem with my graphic card GV-N3060GAMING OC-12GD.
2 smd elements are missing.
I've already bought a boardview but it's not complete - that specific area is not attached. I tried with different similar models but without success.
This is my PCB
And this is screen of boardview
As you see those missing capacitors or resistors are not on boardview.
Also i compared every single transistor from boardview to real card and everything is related.
It seems that this one is like extra.
Could anyone...08-09-2025, 10:26 AM -
Hi all,
I'm looking for the BoardView file for an ASUS TUF Gaming A15 motherboard, specifically DA0NJM8C0 Rev C (Quanta NJI). My repair technician has identified a power regulation issue, and we need the BoardView to trace the power lines accurately....07-17-2025, 03:59 AM -
Hi, I need the boardview and schematicsfor an HP OMEN 15-ax204ns laptop, purchased in 2018, with the following specifications:- Processor: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz
- RAM: 4.00 + 4.00 GB
- Hard Drive: 1TB
- Product ID: 00325-96088-89605-AAOEM
- N/S: 5CD70805T8
If you can help me locate the boardview and schematics or a boardview file, I would really appreciate it.
Thank you for your help!... -
Hello everybody,
I have the schematics already of this device but no boardview and it is being very difficult to locate the fault.
I have +3P3VAS but then nothing else, I suspect something related with 1V8 regulators, but without boardview it is very difficult to locate those components and or pads to test.
Does somebody has the boardview of this model? Or can point out where to test?
Thanks!05-12-2025, 03:29 AM -
If anyone has the boardview and can share I would greatly appreciate it! I have the repair guide, but I still need the boardview. My BMC cannot initialize, likely due to damage around the enable switch....
Comment