Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Hi everyone! I have the board view for my motherboard, but I’m not sure where to solder each pin of the BIOS chip since the original pads are damaged. Could anyone guide me on which alternative points to use for each pin? Any advice would be greatly appreciated Zbook 15 G3 , board APW50 LA-C381P...