HP ENVY x360 13-bd0526TU Schematic or Info ?

[Russ1]

Hi Guys, first time forum user, long time needer of help. This one comes in with water damage, causing clear component damage on both sides of board. Unit is dead no power no charge no lights no life, Looks like caps and resistors as a minimum.

Is there anyone who can help with some I.D. of these blown compnents ? And any other info that might help ? thanks. Russ

[AL._.EX]

Platform???!!!

[Russ1]

thanks for responding AL I'm new to this.... have never used it before but it looks like BOARDVIEW is what I need, showing component locations and values....this board has zero identification on any compnents so I guess i will take ANYTHING you have and try to decipher....thanks.

[Russ1]

It looks like it's the same board as HP ENVY x360 13-AY series.....do i just need to purchase the boardview file ?

[SMDFlea]

Everything thats posted here is free.There are "paid" sites where you can possibly buy it if its available. We need the motherboard model number,it should be silkscreened in white lettering ,somewhere... Take the board out and take pictures of both sides of the board if you can`t find anything

[PEDROPERICO]

Hi, possible Hp Envy x360 13-BD LA-K261P
https://www.badcaps.net/forum/troubl...ematic-request

[Russ1]

thanks very much pedro, will check it out, I've attached full board photo's anyhow....

UPDATE: I've replaced the 2 x burnt resistors and 1 x cap pictured, but still no charge/power light so most likely further damage, could be a bridge too far but will try to check charge/power circuit.....