UPDATE: I've replaced the 2 x burnt resistors and 1 x cap pictured, but still no charge/power light so most likely further damage, could be a bridge too far but will try to check charge/power circuit........
Russ1
New Member
Last Activity: 04-10-2025, 09:18 PM
Joined: 03-17-2024
Location: Kununurra
-
thanks very much pedro, will check it out, I've attached full board photo's anyhow....
UPDATE: I've replaced the 2 x burnt resistors and 1 x cap pictured, but still no charge/power light so most likely further damage, could be a bridge too far but will try to check charge/power circuit........ -
It looks like it's the same board as HP ENVY x360 13-AY series.....do i just need to purchase the boardview file ?Leave a comment:
-
thanks for responding AL I'm new to this.... have never used it before but it looks like BOARDVIEW is what I need, showing component locations and values....this board has zero identification on any compnents so I guess i will take ANYTHING you have and try to decipher....thanks.Leave a comment:
-
HP ENVY x360 13-bd0526TU Schematic or Info ?
Hi Guys, first time forum user, long time needer of help. This one comes in with water damage, causing clear component damage on both sides of board. Unit is dead no power no charge no lights no life, Looks like caps and resistors as a minimum.
Is there anyone who can help with some I.D. of these blown compnents ? And any other info that might help ? thanks. Russ... -
Gday, Just a repair guy constantly trying to find ways to diagnose, repair, and improve the multitude of hardware rubbish out there. My main focus of this forum is information around - laptop and desktop m/b's - pc and mac. and power supply repair. Have done a few successful surface mount repairs but have a long long way to go !!.....thanks in advance.Leave a comment:
No activity results to display
Leave a comment: