L655D Schematic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lord
    Badcaps Veteran
    • May 2011
    • 319
    • Croatia

    #1

    L655D Schematic

    Hi all,
    I need some schematics for a Toshiba L655D-S5116, the board P/N is DA0BL7MB6D0.
    The problem is that that backlight twinkles, the backlight on/off pin is loosing voltage.

    Thank you very much in advance!

    Kindest regards,
    Darko
  • lord
    Badcaps Veteran
    • May 2011
    • 319
    • Croatia

    #2
    Re: L655D Schematic

    Uh, i found it on faqp.ru

    Comment

    • lord
      Badcaps Veteran
      • May 2011
      • 319
      • Croatia

      #3
      Re: L655D Schematic

      Here it is, if somebody needs it
      Attached Files

      Comment

      • olan.fc
        New Member
        • Jun 2015
        • 1
        • Indonesia

        #4
        Re: L655D Schematic

        Thank so much for the schematic

        Comment

        • victor_quiroga
          Senior Member
          • Dec 2014
          • 60
          • argentina

          #5
          Re: L655D Schematic

          Gracias

          Comment

          • badas
            New Member
            • Feb 2017
            • 4
            • philippine

            #6
            Re: L655D Schematic

            Thanks for this

            Comment

            • badas
              New Member
              • Feb 2017
              • 4
              • philippine

              #7
              Re: L655D Schematic

              Originally posted by lord
              here it is, if somebody needs it
              thanks mr lord

              Comment

              • victor_quiroga
                Senior Member
                • Dec 2014
                • 60
                • argentina

                #8
                Re: L655D Schematic

                thank you
                Last edited by SMDFlea; 08-27-2020, 02:59 AM.

                Comment

                • jacknick
                  Member
                  • Aug 2020
                  • 14
                  • Chile

                  #9
                  Re: L655D Schematic

                  Thank you so much.

                  Comment

                  • Andyservo
                    Senior Member
                    • Jun 2013
                    • 152
                    • Indonesia

                    #10
                    Re: L655D Schematic

                    Originally posted by lord
                    Here it is, if somebody needs it
                    thank you..

                    Comment

                    • MANU55
                      New Member
                      • May 2018
                      • 3
                      • México

                      #11
                      Re: L655D Schematic

                      Thank you.

                      Comment

                      Related Topics

                      Collapse

                      • TinkerTron
                        Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
                        by TinkerTron
                        Hey everyone,

                        I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

                        Instead, here's what's been bugging me so far:
                        The schematic...
                        03-06-2025, 02:03 PM
                      • atunguyd
                        Acer x163w Monitor PSU schematic
                        by atunguyd
                        Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
                        The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
                        03-05-2025, 02:08 PM
                      • ianpoultonknights
                        Zenbook Flip 15 UX562AI schematic
                        by ianpoultonknights
                        Had one of these come in for repair with a blown battery and a WiFi issue, battery has been replaced with genuine battery (twice) and won't take a charge works fine on AC, WiFi issue gone away. Looking for a schematic so I can trace the charger circuit UM562F is only one I can find, this is the 562AI model.Had a unit come in for repair — 562AI model — with a blown battery and WiFi issue. WiFi fault has cleared, but battery won’t charge despite replacing it twice with genuine parts. Device operates fine on AC power. Suspect charger circuit fault. Only schematic I’ve found so far is for...
                        06-26-2025, 02:41 PM
                      • Much Bugs
                        MSI Z390 A-PRO Schematic and BoardView
                        by Much Bugs
                        The Schematic and BoardView( *.cad ) of MSI Z390 A-PRO , the board model no is MS-7B98 Rev1.0-1.1 ....
                        06-24-2025, 10:13 AM
                      • Adv10119
                        Need help please! schematic for LA-9982P rev 3.0 (A02)
                        by Adv10119
                        Please help, i need schematic diagram for Dell inspiron 3537 board LA-9982P rev 3.0 (A02). Specific for A02.

                        I have a one beep with no display problem. Did reprogrammed the bios but no luck. i tried to troubleshoot using rev 3.0 (A08) version schematic and boardview but there's components/rails in the schematic that is none in my actual board, this is why I'm having problem checking every power rail needed if ok. attached is the photo of my actual board.

                        I'm not sure if A02 and A08 is really different schematic version from each other, but I have to try....
                        01-31-2024, 01:18 AM
                      • Loading...
                      • No more items.
                      Working...