-
-
Re: daax3mb16a1 rev:a DDR2 version schematic needed.
thanksComment
-
Re: daax3mb16a1 rev:a DDR2 version schematic needed.
I got this piece of electronics. Plugged in to laboratory power supply. 0.004A, no reaction on power button. There's 3&5V on coils. Have 3V on power button, BIOS chip, EC. But no start at all. WTF is going on with this mobo?Comment
-
dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad -
Dynabook Satellite Pro L40-G-102 Schematic Needed. -
Hello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at... -
Hello,
I need your help finding the MSI GF63 12UDX (Board MS-16R81 VER_2.0) schematic.
I accidently inserted MSI USB a programmer that was connected to a board that has Neutral tied to GND, instead of connecting it to the USB-ISO that was on another port (Friday afternoon mistakes....).
Now it doesn't start. 😏
I've looked for burned parts but found none.
The 20V from the adapter are ok and the battery has 12V if I disconnect the battery plug.
I need the schematic to try to understand where there the problem may be or if it is repairable.
Thanks!... -
Sir ,
I need the schematic of h61m-s rev1.1 gigabyte motherboard.
Recently this board came to me for repair but could not find its schematic .
The problem of this board is no display but the board has a power on it .Processor is not heating .
For preliminary investigation i changed vga cable ,ram and processor but the same issue persist.
Whenever i switch on the motherboard monitor says NO SIGNAL .
The board is almost new .No sign of corrosion on the board seen .
...
Comment