Anybody has this?
-
-
Re: HP 4720s scheme
this should be it
sretno s popravkom
Im Back... sort of...
-
Re: HP 4720s scheme
Hehe
Hvala! (Thank you)Comment
-
Re: HP 4720s scheme
Hi I got same laptop on desk, it dont show any video on LCD or external.
Just for direction, what is be problem in your case ? I susspect ATI graphic chip or Intel chipset, Intel more, because it look more heated (blue nianse on core)
Thank you.Comment
-
Re: HP 4720s scheme
After reflow intel chipset work
Comment
-
Re: HP 4720s scheme
Great! But i found that reflows are a short term solutions. Everybody gets back with the same problem after 3-4 weeks. After reball no one comes back (except 6735s, 4525s, dv6 and other with same graphic chip).
Oprosti što nisam odgovorio, vidio sam pitanje, ali sam bio u gužvi i potpuno zaboravio na to...
Comment
-
looking for scheme robusta 6050a3128301 a01
Dynabook l50-g 11j04-02-2025, 03:51 PM -
Would be grateful if you send me the electro scheme for this motherboard, mentioned in title. If anyone is interested why:
-first keyboard backlight stopped working
- a couple months later the keyboard itself stopped working.
- then, in two days, the laptop itself stopped booting.
Thanks everyone in advance04-13-2024, 01:13 AM -
Hello,
I am looking for the board view and scheme for HP Spectre x360 13-aw0030ng DA0X3AMBAG0 REV G
Thank you very much! -
Hi friends, I have a Lenovo G710 that doesn't want to boot. I tried to repair the power connector (it was broken and no longer had perfect contact) and after I fixed the problem and assembled the computer it did not start. Only the power LED lights up. The screen is closed, the supply voltage to the connector on the motherboard is 18.8v, in pin 3 it is 1.4v, there are no components that overheat. It's been a few days since I've been looking at it for a long time and I don't understand what got it, it worked perfectly. Am I doing something wrong with the commissioning? What do you say, how can... -
This project was inspired by PolloLocos GitLab project from here : https://gitlab.com/polloloco/fujitsu-bios-unlocker.
I write an "User friendly" program what works offline.
Unpack the two files in the same directory then run FSUnlock_NEW_GUI.exe.
The first two groups (203c-d001-) are auto-completed and after that you must type just the characters because dashes are auto-completed as well.
Hit Enter or click on "Generate the master password".
Don't forget to clear the Supervisor password after entering the BIOS with the same...
Comment