Acer c5v01 la-e892p schematic

Collapse
X
 
  • Time
  • Show
Clear All
new posts

Related Topics

Collapse

  • atunguyd
    Acer x163w Monitor PSU schematic
    by atunguyd
    Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
    The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
    03-05-2025, 02:08 PM
  • wasyl
    Acer Nitro AN515-46 HH51R LA-M002P R1A BoardView File + schematic
    by wasyl
    Hi, did not found here so uploading to help...
    Yesterday, 07:40 AM
  • Proxy64
    Looking for Acer Predator 17 G9-793 (N15P4) schematic
    by Proxy64
    Hi, I am looking for schematics for an Acer Predator 17 G9-793-73A6?
    I can not read the last digit, maybe 6.
    In another topic I found a boardview that seems to match mine: Acer Predator 17 G9-793 - Pegatron MU5DC CH7DC BoardView
    But in the same topic schematics don't match (both board view & mine) : Acer Predator 17 G9-793 - Pegatron MU5DC CH7DC REV 2.0
    On this mainboard, the GPU is dead (shorted), but I am trying to have it booting without the GPU Nvidia, to disconnect GPU I have desolder 3 coils powering the GPU, and one bigger in upstream these 3.
    Now it begin...
    06-05-2025, 09:30 PM
  • ARKADII KAPLAN
    boardview schematic for acer DAZAWMB18B0 motherboard.
    by ARKADII KAPLAN
    Hi there all, Merry Christmas and Happy New Year!

    Looking for advice, Need to restore/fix the damaged Acer Aspire 514 -54 power circuit pathways.

    I am not good at reading schematics and have difficulty finding the board viewer schematic or simple schematic for damaged parts, but I have all the tools and experience for micro-soldering. All I need to figure out is which ends (from-to) and trace wires to restore lines.

    Hope the pictureS are clear enough to see the problem...
    01-05-2025, 03:57 AM
  • bhachi
    GALIO Rev A M11 ( HP Pro Tower 280 G9 PCI Desktop PC ) Schematic Needed Or if anyone can tell me the IC details attached
    by bhachi
    Hello There,
    As subject line suggests, can anyone provide the schematic for the same ?

    or can anyone through some lite on the IC/MOSFET/BUCK number ( pictures attached )...
    07-31-2025, 07:23 AM
  • Loading...
  • No more items.
Working...