Dell e7240 FW Status error

[blade6591]

hi guys, FW status error started appear during boot, I think because bad cmos battery. Battery has been changed but fw error is still there..

I know that I have to flash bios via programmer, I have minipro, but I am not sure which chip contains intel me firmware.

Could someone help me ? Thanks a lot

[hardware1]

Re: Dell e7240 FW Status error

hi guys, FW status error started appear during boot, I think because bad cmos battery. Battery has been changed but fw error is still there..

I know that I have to flash bios via programmer, I have minipro, but I am not sure which chip contains intel me firmware.

Could someone help me ? Thanks a lot

Can't read what's written on the chips, take a separate clear image for each chip.

[blade6591]

Re: Dell e7240 FW Status error

hi, U1 chip (on top) - 25q064A, U2 chip - 25q03213 thank you

[hardware1]

Re: Dell e7240 FW Status error

hi, U1 chip (on top) - 25q064A, U2 chip - 25q03213 thank you

You should upload both chips to combine them, U1 is 8MB and U2 is 4MB.

[blade6591]

Re: Dell e7240 FW Status error

okay, here is readed dump

[hardware1]

Re: Dell e7240 FW Status error

okay, here is readed dump

Here's your new files, try them and let me know the results.

[blade6591]

Re: Dell e7240 FW Status error

Hi, great, it is working well. Thanks a lot.