---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Try, I think it should be passwordfree with this patch:
Vesko365,
Thank you for your help and sorry to be a pain in the butt.
Unfortunately with this version, I am also getting the (5) flashing of the caps lock and Scroll(num lk) keys, then fan runs at full speed after about 20 seconds. I power cycled multiple times without any changes.
No issues with the soldering, and the codes matched to yours after the write as well.
Thank you again for all your time
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Sorry I've missed your post earlier.
After burning your new code I am also getting the (5) flashing cap lock and Scroll(num lk) keys followed by the high speed CPU fan, and screen is blank as well. Please let me know what else I can try. Really really appreciated for all your help.
Don't worry , I have a few more aces up my sleeve.
Vesco356,
I am also getting the same (5) flashes and blank display with this version.
Could I ask to try it again I am getting very good at programing and soldering with this. LOL
Thank you very much
Sure, here it is - the last ace for today.
This 1040 turns out to be a tough fighter.
Just make sure about the content of the chip, use verification after programming, I know you do, but let me say it one more time, just in case. Because something strange is going on here, my initial file should work, I'm almost sure about that, secondly HPUnlocker must do the job too (for sure with 1041 G1), but you said both don't, and exactly that is strange and inexplicably for me.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Sure, here it is - the last ace for today.
This 1040 turns out to be a tough fighter.
Just make sure about the content of the chip, use verification after programming, I know you do, but let me say it one more time, just in case.
Vesco356,
Thank you for keep trying, but I am getting the same result as before, flashing caps lock and Scroll keys and no display. Please let me know if you want me to try it again. Thank you again
There is no need for new patches I think, If you are sure about the chip content. Remove the main and rtc battery and try autostart with charger only.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Hi, I have attached a zip file containing the original locked main(25Q128) and secondary(25Q16) BIOS files from the 1040 G2. Please let me know if you need additional information. Thank you so much for your help
post the full name and model of the laptop and the motherboard model.
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
post the full name and model of the laptop and the motherboard model.
Peste,
Please see system information you have requested from the BIOS before any pathing attempts, I didn't find a white sticker as indicated by other members.
Thank you again. Best regards
Product Name: HP EliteBook Folio1040 G1
SKU Number: G7A91UC#ABA
System Board ID: 213E
System Board CT: PEADT3ANN7W0E1
Please see system information you have requested from the BIOS before any pathing attempts, I didn't find a white sticker as indicated by other members.
Thank you again. Best regards
Product Name: HP EliteBook Folio1040 G1
SKU Number: G7A91UC#ABA
System Board ID: 213E
System Board CT: PEADT3ANN7W0E1
I am not quite sure what's the issue now, but I am getting flashing white/orange LED by the power connector. I am hoping I didn't damage any of the traces. I will try and reprogram the original image and see if that helps.
In the meantime, thank you all(Peste, Vesco356, Maxpower3) for all your diligent assistance. Take care
I am not quite sure what's the issue now, but I am getting flashing white/orange LED by the power connector. I am hoping I didn't damage any of the traces. I will try and reprogram the original image and see if that helps.
In the meantime, thank you all(Peste, Vesco356, Maxpower3) for all your diligent assistance. Take care
i dont understand with the little modification made to the files , why blank screen or leds blink ?? Very Strange
it should have worked !!
the restart can be long and do several cycles before backlight come
Totally agreed Maxpower3, I have restored the original code and it booted up fine. I might give it another shot when I gather enough courage. Thank you again all.
Comment