Hello to all participants.
I ask for your help. I have a laptop HP ProBook 450 G3
with a set power-on password and an administrator password to enter the BIOS.
I unsoldered the BIOS Winbond 25Q128FVSQ chip, read the dump and used the HPUnlocker program, then wrote down the unlocked dump and soldered the chip.
But after loading, the offer to enter the password remained, the choice of entering a password for the BIOS administrator or entering a power-on password appeared.
Before unlocking, you were asked to enter a power-on password.
I am attaching the original dump and the unlocked version.
Look please.
Hello to all participants.
I ask for your help. I have a laptop HP ProBook 450 G3
with a set power-on password and an administrator password to enter the BIOS.
I unsoldered the BIOS Winbond 25Q128FVSQ chip, read the dump and used the HPUnlocker program, then wrote down the unlocked dump and soldered the chip.
But after loading, the offer to enter the password remained, the choice of entering a password for the BIOS administrator or entering a power-on password appeared.
Before unlocking, you were asked to enter a power-on password.
I am attaching the original dump and the unlocked version.
Look please.
Hi Can you please help to remove the error message"HP Endpoint Security Controller Problem
There is a problem with the HP Endpoint Security Controller on the unit
Please contact HP Inc. to have the unit serviced"
Two BIOS BIN files are attached.
Hi Can you please help to remove the error message"HP Endpoint Security Controller Problem
There is a problem with the HP Endpoint Security Controller on the unit
Please contact HP Inc. to have the unit serviced"
Two BIOS BIN files are attached.
Hello Lapfix,
Many thanks for your help!
Having flashed your BIOS version, I managed to get rid of the power-on password, but the BIOS administrator password remained. Unfortunately, I don't know him. I would like to get rid of it in order to get access to the BIOS settings.
Could you help me this time too.
Thank you again.
Hello Lapfix,
Many thanks for your help!
Having flashed your BIOS version, I managed to get rid of the power-on password, but the BIOS administrator password remained. Unfortunately, I don't know him. I would like to get rid of it in order to get access to the BIOS settings.
Could you help me this time too.
Thank you again.
This tool is awesome, I have just programmed my very first bios for HP 4520s and welded it to motherboard, and IT WORKS, laptop is starting and bios password IS GONE! THANKS
Comment