I have problem my old bios no display, i flashing with other bios display but always beep every second time.
can rebuild my old bios attached.
Lenovo Ideapad 3 14ADA05 81W0
Board GS540/GS550/GS750 NM-C821 Rev 1.0
SN : PF3FEG4N
I have problem my old bios no display, i flashing with other bios display but always beep every second time.
can rebuild my old bios attached.
Lenovo Ideapad 3 14ADA05 81W0
Board GS540/GS550/GS750 NM-C821 Rev 1.0
SN : PF3FEG4N
Good morning everyone, I have a problem with my Lenovo, it turns on but the screen remains black and caps lock doesn't work. I tried some loaded bios and also the procedure described in the first post. Could someone help me figure out if I'm doing something wrong? Thanks a lot to everyone
Good morning everyone, I have a problem with my Lenovo, it turns on but the screen remains black and caps lock doesn't work. I tried some loaded bios and also the procedure described in the first post. Could someone help me figure out if I'm doing something wrong? Thanks a lot to everyone
I have a black screen, power button blinking with my Lenovo 17ADA05.
I have tried to flash a new bios with DMI data but I have the same problem.
Can you provide to me a corrected bios ?
I have a black screen, power button blinking with my Lenovo 17ADA05.
I have tried to flash a new bios with DMI data but I have the same problem.
Can you provide to me a corrected bios ?
Everything you need is in this thread,start by reading post 1 .Also the serial number must be typed and posted, please read and familiarise yourself with the rules
Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
Hi, I have a Lenovo V15-ADA laptop that will turn on but nothing else. I have checked around the board all seems ok, so I wanted to try a new bios. If possible could someone have a look at this for me, I have attached a zip file with the original bios and the laptop serial number. Any help would be appreciated. Thanks
My screen went black and I downloaded a bios from this topic. It is working perfectly. >) . However, I do not know now the original serial number and other data as the label from the bottom of the laptop is gone. I hope someone can help me to extract the data from the dead bios and inject it into the working one. I attached both. thx
My screen went black and I downloaded a bios from this topic. It is working perfectly. >) . However, I do not know now the original serial number and other data as the label from the bottom of the laptop is gone. I hope someone can help me to extract the data from the dead bios and inject it into the working one. I attached both. thx
before asking you, I tried to put the various bios that I found in the forum. but nothing to do. Thank you
the bios you posted has 4MB...it should have 8MB, so you write and read it with errors...and because of this it doesn't work...remove the bios chip from the motherboard before writing or reading. ..if you don't have anything to stick wires between the chip and the programmer..don't use clipsil because it gives errors..
Leave a comment: