Originally posted by rindorika
View Post
Announcement
Collapse
No announcement yet.
IdeaPad 3 14ADA5/15ADA05/17ADA05 Lenovo V14-ADA/V15-ADA Bios
Collapse
X
-
Hello,
I have attached my original dump. Could you please check and correct it? Thanks.
LENOVO 15-ADA MODEL 82C7
SN: PF2KVQ11
MTM: 82C7007KTXAttached Files
Leave a comment:
-
Thread merged. Read post 1 ,everything you need is right here in this thread.
-
Hi guys,
Please I need to repair this bios.
I commented: The cover does not have the model data, serial number, etc., I do have the backup of the original bios, but it does not give me an image, I have tried creating a bios from the website and it works but the notebook model does not appear , nor the MTM, nor the serial number.
Can the bios be repaired?Attached Files
Leave a comment:
-
Originally posted by Seb RS View PostHello,
Same as everyone else, black screen at boot on a Lenovo 17ADA05.
I followed the tutorials.
I extracted the bios to recover the original DMI block but the ROM is completely empty !
Can you help me ?
Lenovo 17ADA05
Model: 81W2
SN: PF3FRKGZ
MTM: 81W20059EN
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
Leave a comment:
-
Hello,
Same as everyone else, black screen at boot on a Lenovo 17ADA05.
I followed the tutorials.
I extracted the bios to recover the original DMI block but the ROM is completely empty !
Can you help me ?
Lenovo 17ADA05
Model: 81W2
SN: PF3FRKGZ
MTM: 81W20059EN
Leave a comment:
-
Originally posted by MrMike25 View PostI have an Lenovo ideapad 3 15ADA05 with a bios password. I pulled the bin file off the bios chip but I can't seem to find where the password is located to translate it from a hex editor. I can reflash the bios but it removes everything even the product key. I really like to find the password so I can enter it and remove it. I have done this in the past but it's been years since. I can see where it says supervisor password and password in the hex editor but the coding isn't letting me convert it into a password. Any help would be greatly appreciated. Thanks!
Leave a comment:
-
I have an Lenovo ideapad 3 15ADA05 with a bios password. I pulled the bin file off the bios chip but I can't seem to find where the password is located to translate it from a hex editor. I can reflash the bios but it removes everything even the product key. I really like to find the password so I can enter it and remove it. I have done this in the past but it's been years since. I can see where it says supervisor password and password in the hex editor but the coding isn't letting me convert it into a password. Any help would be greatly appreciated. Thanks!Attached Files
Leave a comment:
-
Originally posted by Crazy Dad View PostHello, please help me with the BIOS,
LENOVO 15-ADA MODEL 82C7
SN: PF2NS1TZ
Attached Files
Leave a comment:
-
Hello, please help me with the BIOS,
LENOVO 15-ADA MODEL 82C7
SN: PF2NS1TZ
Attached Files
Leave a comment:
-
Originally posted by its service View PostModel : V15-Ada
SN : pf26b1fc
Part no : Nm-d151 rev 1.0
Problem no display need to onboard ram disable, I'll attached the originial dumpAttached Files
Leave a comment:
-
Model : V15-Ada
SN : pf26b1fc
Part no : Nm-d151 rev 1.0
Problem no display need to onboard ram disable, I'll attached the originial dumpAttached Files
Leave a comment:
-
Originally posted by SMDFlea View Post
Disable RAM by resistor straps - https://www.badcaps.net/forum/troubl...vo-ip3-nm-d151
Leave a comment:
-
Originally posted by than_22 View Post
not working,, laptop no display with this bios
Leave a comment:
-
Originally posted by than_22 View PostPlease help me to Disable onboard RAm
Lenovo V15-ADA
Board Code - GV451 & GV551 Nm-D151
S/N - PF2862KS
MTM - 82C7005RPHAttached Files
Leave a comment:
-
Please help me to Disable onboard RAm
Lenovo V15-ADA
Board Code - GV451 & GV551 Nm-D151
S/N - PF2862KS
MTM - 82C7005RPHAttached Files
Leave a comment:
-
Thank you very much!
After the firmware it turned on and froze, after rebooting there is no initialization. I have another malfunction.
Leave a comment:
Leave a comment: