acer nitro an515-43

[SMDFlea]

Re: acer nitro an515-43

Not working.(Turning on but no picture), is it possible because of the programmer not verifying the writing and cause the problem? How can I solve that problem?

Clean the solder from the pins using some flux and braid,and make sure the pins all line up in or on the socket or adapter.If you have a spring loaded adapter try pulling up at both sides with one hand and try programming again.If you still have the same errors then the chip is bad,replace with another.

[genai]

Re: acer nitro an515-43

Not working.(Turning on but no picture), is it possible because of the programmer not verifying the writing and cause the problem? How can I solve that problem?

[lapfix]

Re: acer nitro an515-43

Sn:nhq6neu00p952110873400

And when I tried to write the chip if I check in( Verify after) I get this message, but without the verify, the program show the programming succesful.

Try

[genai]

Re: acer nitro an515-43

Sn:nhq6neu00p952110873400

And when I tried to write the chip if I check in( Verify after) I get this message, but without the verify, the program show the programming succesful.

[lapfix]

Re: acer nitro an515-43

When I first read the chip, it was empty. I using a TL866II plus programmer, and xgpro program. I attached a BIOS, what I used.

so ,you don t have the original bios !! post your serial number

[genai]

Re: acer nitro an515-43

When I first read the chip, it was empty. I using a TL866II plus programmer, and xgpro program. I attached a BIOS, what I used.

[lapfix]

Re: acer nitro an515-43

did you do a clear me , if not try or post your old dump

[genai]

Re: acer nitro an515-43

Hi, I have a FH50Q LA-J621P Rev 1.0 motherboard.
When I turn on the laptop, looks fine , but no picture at all. I downloaded the bios bin and write in the bios chip(25lb64csig) but after I turn on only once give me the "ACER" logo but nothing else.

[jimore]

Re: acer nitro an515-43

here my back up try

my back up

[jimore]

Re: acer nitro an515-43

i have a acer laptop with no screen. Im using tl866 and this device cant read xmc qu64 bios chip. So i tryed with another 64fw bios chip with original site bios but not screen, maybe i edited wrong. Anyway i need that bios anyone can help me about that? Motherboard = ph50q la-j621p rev1.0

here my back up try

[SMDFlea]

Re: acer nitro an515-43

thanks. you have a VGA bios for that?

no i don`t ,only what you posted.

[salawayon]

Re: acer nitro an515-43

Its the VGA bios youve posted. It might help others anyway

thanks. you have a VGA bios for that?

[SMDFlea]

Re: acer nitro an515-43

got same unit with no display problem but my EC file is at 1mb. i attached my backup. thanks.

Its the VGA bios youve posted. It might help others anyway

[salawayon]

Re: acer nitro an515-43

here you go ,extracted from latest bios update + your DMI .


D 2B0000 - 2B0FFF

got same unit with no display problem but my EC file is at 1mb. i attached my backup. thanks.

[Anethra]

Re: acer nitro an515-43

ty for bios but no screen. i think problem is not about to bios.

[SMDFlea]

Re: acer nitro an515-43

can you help me please

here you go ,extracted from latest bios update + your DMI .


D 2B0000 - 2B0FFF

[Anethra]

Re: acer nitro an515-43

Select MX25U6435F ,you can untick Check-ID ,its 1.8V isn`t it ? .Post your bios backup .

can you help me please

[Anethra]

Re: acer nitro an515-43

old bios here thank you

[SMDFlea]

Re: acer nitro an515-43

Select MX25U6435F ,you can untick Check-ID ,its 1.8V isn`t it ? .Post your bios backup .

[Anethra]

i have a acer laptop with no screen. im using tl866 and this device cant read xmc qu64 bios chip. so i tryed with another 64fw bios chip with original site bios but not screen, maybe i edited wrong. anyway i need that bios anyone can help me about that? motherboard = ph50q la-j621p rev1.0