Re: Lenovo Ideadpad gaming 3 15ACH6
well, most likely the last bios you flashed is working, but the client just told me. Tried replacing screen with battery installed. before changing screen, pc gives screen from hdmi. I think it may have damaged the processor. thanks for your helps...
Anethra
Senior Member
Last Activity: 04-07-2024, 01:06 AM
Joined: 12-04-2018
Location: Bolu
-
Re: Lenovo Ideadpad gaming 3 15ACH6
with this bios pc not shutting down but also no screen...Leave a comment:
-
Re: Lenovo Ideadpad gaming 3 15ACH6
S/n: Mp25lmw6Leave a comment:
-
Re: Lenovo Ideadpad gaming 3 15ACH6
no screen and pc shutting down after 5 secondLeave a comment:
-
Re: Lenovo Ideadpad gaming 3 15ACH6
i readed again from chip, but it seems like same
Normally, I used to extract the bios with the hex editor by looking at the original bios, but there is a situation that I do not understand in this bios....Leave a comment:
-
Lenovo Ideadpad gaming 3 15ACH6
i didn't extract main and ec bios from downloaded website bios. anyone can help me about this? org bios and downloaded bios in attachment.
mb model GOG21 LA-K971P rev1a... -
Re: msi GE70 2QE not open with gpu
all mosfets single not dual. and i measured all the other mosfets one by one. all ok. sorry for late replyLeave a comment:
-
Re: msi GE70 2QE not open with gpu
As you said, one of the mosfets is faulty. But even though I change it, nothing changes.Leave a comment:
-
Re: msi GE70 2QE not open with gpu
no one have any idea?Leave a comment:
-
msi GE70 2QE not open with gpu
motherboard model ms-17591 ver1.0.
When I start the computer with the coils of the video card installed, the adapter falls into an instantaneous short circuit. but when I remove the coils of the video card, the computer turns on and the image appears. I changed gpu supply (uP1642) and gpu (N16P-GX-A2) but there was no change.
up1642
1 BOOTT1 = 4.44v
2 UGATE1 = 0.02V
3 EN = 3.2V
4 PSI = 3.3V
5 VID = 1.5V
6 REFADJ = 0.99V
7 REFIN = 0.89V
8 VREF = 2.0V
9 TON = 0V
10 FBRTN = 0V
11 FB =0.06... -
Re: MBPGI5CN58-AN11 clear me
laptop is came back with same problem. problem hangs on windows loading screen. with before clean me bios fixed this problem. i think need another clean me bios. can you help me again about that?Leave a comment:
-
Re: MBPGI5CN58-AN11 clear me
working for now. ty...Leave a comment:
-
MBPGI5CN58-AN11 clear me
anyone can clear me this bios for me plss? i tryed few time but didnt. every time giving to error.... -
Re: acer nitro an515-43
ty for bios but no screen. i think problem is not about to bios.Leave a comment:
-
acer nitro an515-43 la-j621p need schematic
i need schematic for acer nitro an515-43 motherboard:la-j621p. Anyone have this schematic? -
Re: acer nitro an515-43
can you help me please...Leave a comment:
-
Re: acer nitro an515-43
old bios here thank you...Leave a comment:
-
acer nitro an515-43
i have a acer laptop with no screen. im using tl866 and this device cant read xmc qu64 bios chip. so i tryed with another 64fw bios chip with original site bios but not screen, maybe i edited wrong. anyway i need that bios anyone can help me about that? motherboard = ph50q la-j621p rev1.0 -
samsung q330 ba41-01267a schematic
i need samsung q330 ba41-01267a schematic anyone can help me about that? -
Re: Lenovo g710 (dumb02)
I faced the same problem today and solved the problem. First, the 3v coil was short circuited. I changed pch. The short circuit in the 3v coil was removed, but the 1225c integrated continued to heat and when I checked the 25q32fv bios chip, I saw it was short. After the io replacement, the computer started working normally. If anyone else encountering the same problem I hope this post helps.Leave a comment:
No activity results to display
Leave a comment: