acer nitro an515-43

[kalilinux25]

mobo code is:LA-J621P after 3 to 5 seconds notebook turns off....serial num is:NHQ6ZSM0010031057C3400.....i attached my orignal file

dmi Added

[alihomee]

mobo code is:LA-J621P after 3 to 5 seconds notebook turns off....serial num is:NHQ6ZSM0010031057C3400.....i attached my orignal file

[SMDFlea]

Thread merged.Please make use of the forum search before posting to find related threads where you can post your request.You do not need to start a new thread every time.

Read the rules, post the serial number/SNID https://www.badcaps.net/forum/troubl...before-posting

[lorins_core]

hello to all Badcaps

I have an Acer Nitro (AN515-43) with no display Problem. fan spin then stop I did all possible basic solutions but still had the same problem. also, I test the voltage on always (5v,3.3v,1.8v) have I think need to flash bios may rebuild or repair the bios bin file,

Thanks

here is the mobo prod. name FH50Q LA-J621P REV 1.0
and the flash file here

[peste]

Hi guys i need some help if someone have the same problem on Nitro 5 AN515-43-R2NL ryzen 7 GTX 1650, because my laptop turn on like 2 second and shutdown immediately.
I allready backup the main and VBIOS IC BIOS and i dont know if its right/not
SN:NHQ6ZSN0020210E6E3400

look for a bios chip on the board, look at both sides... and post the content..

[Rokket]

Hi guys i need some help if someone have the same problem on Nitro 5 AN515-43-R2NL ryzen 7 GTX 1650, because my laptop turn on like 2 second and shutdown immediately.
I allready backup the main and VBIOS IC BIOS and i dont know if its right/not
SN:NHQ6ZSN0020210E6E3400

[Vesko356]

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
• Provide a BIOS/EC dump if possible (vBIOS in your case)
• Post what the problem is, be specific - black screen, no boot, running slow, password. Do NOT post "clean me", "clear bios", "clean bios", "fix bios", "bios need" or other such terms

[Rokket]

Hi guys i need some help if someone has a backup GPU bios for Nitro 5 AN515-43-R2NL ryzen 7 GTX 1650, thank you

[hoaca388]

Re: acer nitro an515-43

original bios and my Serial Number (same problem - no display)

S/N: NHQBCAA001120088623400

Wrong chip.

[rridma]

Re: acer nitro an515-43

original bios and my Serial Number (same problem - no display)

S/N: NHQBCAA001120088623400

[hardware1]

Re: acer nitro an515-43

hi
I need acer nitro an515-43
Mb: fh50p la-h901p bios

Upload your Original Bios and write your device Serial Number.

[dikmen]

Re: acer nitro an515-43

hi
I need acer nitro an515-43
Mb: fh50p la-h901p bios

[genai]

Re: acer nitro an515-43

I got the new chip, but the problem is a same.

[genai]

Re: acer nitro an515-43

I got new chip but the problem is the same.

[SMDFlea]

Re: acer nitro an515-43

Not working.(Turning on but no picture), is it possible because of the programmer not verifying the writing and cause the problem? How can I solve that problem?

Clean the solder from the pins using some flux and braid,and make sure the pins all line up in or on the socket or adapter.If you have a spring loaded adapter try pulling up at both sides with one hand and try programming again.If you still have the same errors then the chip is bad,replace with another.

[genai]

Re: acer nitro an515-43

Not working.(Turning on but no picture), is it possible because of the programmer not verifying the writing and cause the problem? How can I solve that problem?

[lapfix]

Re: acer nitro an515-43

Sn:nhq6neu00p952110873400

And when I tried to write the chip if I check in( Verify after) I get this message, but without the verify, the program show the programming succesful.

Try

[genai]

Re: acer nitro an515-43

Sn:nhq6neu00p952110873400

And when I tried to write the chip if I check in( Verify after) I get this message, but without the verify, the program show the programming succesful.

[lapfix]

Re: acer nitro an515-43

When I first read the chip, it was empty. I using a TL866II plus programmer, and xgpro program. I attached a BIOS, what I used.

so ,you don t have the original bios !! post your serial number

[genai]

Re: acer nitro an515-43

When I first read the chip, it was empty. I using a TL866II plus programmer, and xgpro program. I attached a BIOS, what I used.