Announcement

Collapse
No announcement yet.

Need bios + ec HP 15-N007SS MB DA0U81MB6C0 REV:C

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need bios + ec HP 15-N007SS MB DA0U81MB6C0 REV:C

    Hello,
    Please, i need bios + ec for HP 15-N007SS
    MB is DA0U81MB6C0 REV:C
    BIOS is U22 W25Q32FV
    EC is U13 W25Q80BV

    I attach my files.
    Attached Files

    #2
    Re: Need bios + ec HP 15-N007SS MB DA0U81MB6C0 REV:C

    Originally posted by Simon16 View Post
    Hello,
    Please, i need bios + ec for HP 15-N007SS
    MB is DA0U81MB6C0 REV:C
    BIOS is U22 W25Q32FV
    EC is U13 W25Q80BV

    I attach my files.
    bios extracted from the HP site update, the laptop has four versions of the bios, yours is 02183
    DMI 36F000-36FDFF
    KEYWIN 1CD000-1CD03F
    Attached Files
    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

    >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

    Every donation made will go towards server fees and maintenance costs.

    Comment


      #3
      peste: thanks a lot mate, is working perfect 02183.bin + ec, on same HP 15-N007SS; in my case, notebook was powering on, no screen only 2 blink of caps lock; i also use "Tiny Hexer" found here on forum to inject in your 02183.bin the dmi and winkey; all is working perfect, but i have only a small problem.
      After turn on the notebook, it appears message "HP Manufacture Programming Mode is in Unlock Mode"; i seen that are plenty ways to get read of this message, but what is the simple way? I think also edit the bin, correct?
      Thank you very much.

      Comment


        #4
        Originally posted by c.daniel View Post
        peste: thanks a lot mate, is working perfect 02183.bin + ec, on same HP 15-N007SS; in my case, notebook was powering on, no screen only 2 blink of caps lock; i also use "Tiny Hexer" found here on forum to inject in your 02183.bin the dmi and winkey; all is working perfect, but i have only a small problem.
        After turn on the notebook, it appears message "HP Manufacture Programming Mode is in Unlock Mode"; i seen that are plenty ways to get read of this message, but what is the simple way? I think also edit the bin, correct?
        Thank you very much.
        Try this..
        https://ftp.ext.hp.com/pub/caps-soft...it/HP_BCU.html
        Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

        >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

        Every donation made will go towards server fees and maintenance costs.

        Comment

        Working...
        X