---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
RCUnlocker did unlock the 16MB here locally, but if it didn't work, test the 32MB. First time I do this. Maybe start with flashing 32MB only.
after a long time 10 to 20 minute it finshed , then asked for information on the pic i tried to just enter some bit dont know octet de fonction ....but when iam on the bios tried to disable secure boot to install pc to update bios he demande the pass so the pass still existe?
If you are willing to try, unlock the 16MB file with RCUnlocker, and if it doesn't, continue with the BIG CHIP_unlocked. Please report back. Make sure you have good backups before any flashing is done.
This is how hoaca388 solved it:
"You used the bios of another machine, so in the 32MB bios file, there is MPM information of that device and it has enabled the "security endpoint". I rebuilt the new 32MB bios file, cleaned the ME region.
With the 16MB file, I deleted the first NvramActiveRegn region.
But now you may have trouble with MPM again."
No trouble with MPM was reported, but further work may be needed, perhaps also cleaning ME Region on the 32MB chip. I only cleaned the USER CRED Region.
If you are willing to try, unlock the 16MB file with RCUnlocker, and if it doesn't, continue with the BIG CHIP_unlocked. Please report back. Make sure you have good backups before any flashing is done.
This is how hoaca388 solved it:
"You used the bios of another machine, so in the 32MB bios file, there is MPM information of that device and it has enabled the "security endpoint". I rebuilt the new 32MB bios file, cleaned the ME region.
With the 16MB file, I deleted the first NvramActiveRegn region.
But now you may have trouble with MPM again."
No trouble with MPM was reported, but further work may be needed, perhaps also cleaning ME Region on the 32MB chip. I only cleaned the USER CRED Region.
i tried this files sir but the response is 7blinks on capslock
and i tried the backup again but it has the same response now 7 blinks on capslock
Your backup should always work. Resolder if chip was taken out. If it is a WSON, I usually take it out, clean underside of chip, clean and tin again all pads, with very little solder, lots of flux and hot air station a little bit higher temp setting, faster time. I have had WSON chips that somehow are soldered on one corner but the opposite corner diagonally is lifted, probably due to too much solder in the middle pad. Using a digital microscope helps seeing that tiny detail.
Your backup should always work. Resolder if chip was taken out. If it is a WSON, I usually take it out, clean underside of chip, clean and tin again all pads, with very little solder, lots of flux and hot air station a little bit higher temp setting, faster time. I have had WSON chips that somehow are soldered on one corner but the opposite corner diagonally is lifted, probably due to too much solder in the middle pad. Using a digital microscope helps seeing that tiny detail.
thank you so much for the idea sir btw i will try it again to flash
If you are willing to try, unlock the 16MB file with RCUnlocker, and if it doesn't, continue with the BIG CHIP_unlocked. Please report back. Make sure you have good backups before any flashing is done.
This is how hoaca388 solved it:
"You used the bios of another machine, so in the 32MB bios file, there is MPM information of that device and it has enabled the "security endpoint". I rebuilt the new 32MB bios file, cleaned the ME region.
With the 16MB file, I deleted the first NvramActiveRegn region.
But now you may have trouble with MPM again."
No trouble with MPM was reported, but further work may be needed, perhaps also cleaning ME Region on the 32MB chip. I only cleaned the USER CRED Region.
i tried again this files but still lock btw thank you for reply
feedback for this file thank you sir the lock is gone but i cant default factory when i turn on it will stuck on restart no display and this message when turn on "hp endpoint security control problem" how to turn off this message everytime i turn on
Comment