Need unlock HP elitebook 830 G6

[kingkong computers]

TRY

thankyou so much dear

[shiyab]

not download show error { Invalid File Specified }

TRY

[kingkong computers]

hi try

not download show error { Invalid File Specified }

[shiyab]

PLEAS REMOVE END POINT SECURITY ERROR AND CLEAR LATE DISPLAY THANKS
HP ELITEBOOK 830 G6
PRODID : 7JQ47UC#ABA
SN# 5CG024FCQZ
BUILD ID 19WWCFCT601#SABA#DABA

hi try

[kingkong computers]

PLEAS REMOVE END POINT SECURITY ERROR AND CLEAR LATE DISPLAY THANKS
HP ELITEBOOK 830 G6
PRODID : 7JQ47UC#ABA
SN# 5CG024FCQZ
BUILD ID 19WWCFCT601#SABA#DABA

[SMDFlea]

Re: Need unlock HP elitebook 830 G6

please help me unlock bios file
SN 5CG01084VR
Thanks

Try RCUnlocker - https://www.badcaps.net/forum/troubl...23#post1622423

[aydhie09]

Re: Need unlock HP elitebook 830 G6

please help me unlock bios file
SN 5CG01084VR
Thanks

[peste]

1 need 830 g6 touch bin
6050a3022401

hey!!!!big boss!!!you have almost 200 posts...you are not a beginner anymore..are we still working after you??...if you didn't write this in the post..

post S/N, full name and model, motherboard model, product number,etc.
post the contents of the bios chip even if it is corrupted..

[kingkong computers]

1 need 830 g6 touch bin
6050a3022401

[hoaca388]

hoaca388
There is no reaction to the button, the orange indicator just lights up. I don't know where to look anymore. It turns out that the laptop turns on once with the set of BIOSes that I posted earlier, not the original.

Find issue problem.

[bykanovm]

hoaca388
There is no reaction to the button, the orange indicator just lights up. I don't know where to look anymore. It turns out that the laptop turns on once with the set of BIOSes that I posted earlier, not the original.

[hoaca388]

Hello everyone. I got a HP Elitbook 830 G6 laptop.
The problem is that it doesn't turn on. When I connect the power supply, only the charging indicator lights up orange. There is no response to the button.
I found a tested set of EC BIOS and main 16 MB and 32 MB.
Flashed 2 chips. After that, the laptop turned on, an image appeared on the screen.
The laptop said that the memory was replaced, etc. After that, the laptop turned off and now does not turn on.
When connecting the power supply, the power button blinks white, the diode near the power connector blinks orange and white.
I suspect that the problem is in the BIOS. I am posting the dumps that I flashed and the original dumps that I saved in advance. I also forgot to clarify that the 32 MB flash drive had already been flashed before me. After I downloaded the firmware from it, it failed. I replaced it with a GD25R256DYIG, and what was mx25l25673G. But the laptop started with the new chip and gave the picture as I described

I removed the main 32MB BIOS chip, the blinking of the diodes remained the same, namely the power button quickly blinks 3 times white once a second. The diode near the power connector blinks 3 times orange while it is lit white.

I also flashed another BIOS to a 32MB flash drive, now the indicator near the power connector just lights up orange. It even charges the battery, I look at the lab power supply

HP Элитбук 830 G6.
СН 5CG0155DTF

5CG0155DTF

[bykanovm]

Hello everyone. I got a HP Elitbook 830 G6 laptop.
The problem is that it doesn't turn on. When I connect the power supply, only the charging indicator lights up orange. There is no response to the button.
I found a tested set of EC BIOS and main 16 MB and 32 MB.
Flashed 2 chips. After that, the laptop turned on, an image appeared on the screen.
The laptop said that the memory was replaced, etc. After that, the laptop turned off and now does not turn on.
When connecting the power supply, the power button blinks white, the diode near the power connector blinks orange and white.
I suspect that the problem is in the BIOS. I am posting the dumps that I flashed and the original dumps that I saved in advance. I also forgot to clarify that the 32 MB flash drive had already been flashed before me. After I downloaded the firmware from it, it failed. I replaced it with a GD25R256DYIG, and what was mx25l25673G. But the laptop started with the new chip and gave the picture as I described

I removed the main 32MB BIOS chip, the blinking of the diodes remained the same, namely the power button quickly blinks 3 times white once a second. The diode near the power connector blinks 3 times orange while it is lit white.

I also flashed another BIOS to a 32MB flash drive, now the indicator near the power connector just lights up orange. It even charges the battery, I look at the lab power supply

HP Элитбук 830 G6.
СН 5CG0155DTF

[machystador]

Hi,
thanks for your file.
BIOS has restored his configuration from EC settings, but password is still here. No way ton clear it.
Native keyboard does not work anymore. I had to use usb keyboard. Not sure there's a link with the fact I've flashed bios modification.

Hi, I've finally used another flash memory chip. I've reflashed it with the file you send for EC content (it is the same content with the file I get using rcunlocker. The same tool must be used by LBE++ I suppose).
Now it's okay.
Problem with keyboard seems linked to flex connector of laptop.

Thanks for your help. It's amazing.

[machystador]

Sorry
Flash your Original untouched EC and this main.

first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU to write your DMI:

Hi,
thanks for your file.
BIOS has restored his configuration from EC settings, but password is still here. No way ton clear it.
Native keyboard does not work anymore. I had to use usb keyboard. Not sure there's a link with the fact I've flashed bios modification.

[lapfix]

HP EliteBook 830 G6 CATALONI 6050A3022401-mb-a01


Good afternoon colleagues, two bios are needed for this model. The native bios are damaged, the laptop tries to turn on but without result

Post your damaged bios
Post informations : serial number

[reamon]

HP EliteBook 830 G6 CATALONI 6050A3022401-mb-a01


Good afternoon colleagues, two bios are needed for this model. The native bios are damaged, the laptop tries to turn on but without result

[lapfix]

Hi
I've tried your file.
Laptop LED of power plug now blinks orange.
No display,
It does not draw a lot of current (less than 60 ma).
It is blocked. Nothing happens.
thx

Sorry
Flash your Original untouched EC and this main.

first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU to write your DMI:

[machystador]

Hi
I've tried your file.
Laptop LED of power plug now blinks orange.
No display,
It does not draw a lot of current (less than 60 ma).
It is blocked. Nothing happens.
thx

[lapfix]

Hi,
thanks for your answer.

I guess the file you sent, has been processed by rcunlocker.

I had already tested it before without success.

As it did not work, I've tried to restore original bios and ec images to flash memories but...
I've must have broken something. The symptoms I encounter when I'm connecting laptop battery.

I don't even need to push start button, and
no display, no fan, caps lock led stays always ON .
LED of power plug blinks white at around 2 HZ.

Any idea ? thanks

NO , i didn't use rcunlocker.did you try my file !