Hi,need help with bios dump,it starts and turn off after few seconds,if you can rebuild new bios with my DMI
Thank you
HP Envy X360 Convertible
Model: 13-y-013cl
Board: day0dpmbaf0 Rev. F
Hi,need help with bios dump,it starts and turn off after few seconds,if you can rebuild new bios with my DMI
Thank you
HP Envy X360 Convertible
Model: 13-y-013cl
Board: day0dpmbaf0 Rev. F
post S/N..
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
bios extracted from HP site update for HP ENVY x360 - 13-y013cl
DMI 61BF00 - 61C0FF
KEYWIN 63E000 - 63E03F
Thanks,I copy DMI and Winkey,it says ''manufacture programming mode is in unlock mode'',product information missing ''System board (00A) - Product Family. After restart black screen with fan on maximum,need to remove bios battery and than turns on normally with same warning ''Product information not valid''. Is there any solution,Thanks.
Thanks,I copy DMI and Winkey,it says ''manufacture programming mode is in unlock mode'',product information missing ''System board (00A) - Product Family. After restart black screen with fan on maximum,need to remove bios battery and than turns on normally with same warning ''Product information not valid''. Is there any solution,Thanks.
you didn't write DMI correctly... try again..
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
Comment