hp x360 13 u105la very slow

[aldopc]

Hello friends, I have this hp that came without an image, load a bios that I had saved from a similar computer (x360 13-u104la) but it is very slow, the start takes about 15 seconds to appear the hp logo, I have cleaned the region several times different versions , with Meinject but it doesn't work, I also tried to clean with the hex editor the same result without image ... someone can find out what happens.

[lapfix]

Re: hp x360 13 u105la very slow

Where's your own dump !
Try this

[peste]

Re: hp x360 13 u105la very slow

try..

[RAVI KARAN]

Re: hp x360 13 u105la very slow

Hello friends, I have this hp that came without an image, load a bios that I had saved from a similar computer (x360 13-u104la) but it is very slow, the start takes about 15 seconds to appear the hp logo, I have cleaned the region several times different versions , with Meinject but it doesn't work, I also tried to clean with the hex editor the same result without image ... someone can find out what happens.

try this

[SMDFlea]

Re: hp x360 13 u105la very slow

Where's your own dump !
Try this

AMT isn`t supported

[SMDFlea]

Re: hp x360 13 u105la very slow

try this

AMT isn`t supported

[SMDFlea]

Re: hp x360 13 u105la very slow

Hello friends, I have this hp that came without an image, load a bios that I had saved from a similar computer (x360 13-u104la) but it is very slow, the start takes about 15 seconds to appear the hp logo, I have cleaned the region several times different versions , with Meinject but it doesn't work, I also tried to clean with the hex editor the same result without image ... someone can find out what happens.

MEinject is shit it gets the configurations all wrong. The bios youve been trying to fix is 081A9 ,was that the original bios BID ? .

Try the bios posted by @peste or these bios extracted from the HP bios update

.

[aldopc]

Re: hp x360 13 u105la very slow

MEinject is shit it gets the configurations all wrong. The bios youve been trying to fix is 081A9 ,was that the original bios BID ? .

Try the bios posted by @peste or these bios extracted from the HP bios update

.

Hello friends, thanks for the help, with the Plague file it turned on only the first time, then there is no image, with the smdflea files there is no image, only a message appeared writing block but after finishing it does not show an image, the same thing happens with the files I tried to clean the region myself, the fan rotates and stops constantly without showing an image, recently I had a similar problem and it was solved by changing the bios chip ... would it be the same problem?

[SMDFlea]

Re: hp x360 13 u105la very slow

What bios programmer are you using ,have you tried starting without the hdd attached .

[aldopc]

Re: hp x360 13 u105la very slow

What bios programmer are you using ,have you tried starting without the hdd attached .

I am using an ezp2019, may this be the problem? if i try with and without hdd, and always the same result only fan runs and stops.

[SMDFlea]

Re: hp x360 13 u105la very slow

Both bios at post #7 are extracted from the hp bios update, you can`t get any better bios than them.Which one you needed i don`t know.Either the bios chip needs replacing or the EC is possibly corrupt.Flash the EC if you have a programmer.