vertyanov jig v3.1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • alfredodinolfo
    Senior Member
    • Jan 2013
    • 128
    • N/A

    #1

    vertyanov jig v3.1

    hi,
    my vertyanov sio programmer don't work.
    FTDI is ok but push reset button don't work.
    3V3 is present on Altera and Atmega328, clock is present, on pushreset button only 0.241V, no short on Altera.


    Any suggestion?
    Attached Files
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20366
    • UK

    #2
    Re: vertyanov jig v3.1

    Do you have a genuine vertyanov or a clone .
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • alfredodinolfo
      Senior Member
      • Jan 2013
      • 128
      • N/A

      #3
      Re: vertyanov jig v3.1

      genuine

      Comment

      • SMDFlea
        Super Moderator
        • Jan 2018
        • 20366
        • UK

        #4
        Re: vertyanov jig v3.1

        Use the latest software version, http://vss.store/VERTYANOV_JIG/OTHER...IG_ver_3.X.rar

        The instructions to reset are in the manual:

        The second way is forcing the FW programmer to update. Start the shell and hold the reset
        button on the programmer. While holding the reset button, in the shell click Check
        connection. After the appearance of the window asking to press the reset button - release
        it. This method only works if there is a file named UPDATE.txt in the folder with the
        shell (it is always present by default for convenience). You do not need to update the FW
        of the programmer every time you start the shell "manic".
        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

        Comment

        • alfredodinolfo
          Senior Member
          • Jan 2013
          • 128
          • N/A

          #5
          Re: vertyanov jig v3.1

          nothing.

          is possible atmega328 faulty?

          Originally posted by SMDFlea
          Use the latest software version, http://vss.store/VERTYANOV_JIG/OTHER...IG_ver_3.X.rar

          The instructions to reset are in the manual:

          The second way is forcing the FW programmer to update. Start the shell and hold the reset
          button on the programmer. While holding the reset button, in the shell click Check
          connection. After the appearance of the window asking to press the reset button - release
          it. This method only works if there is a file named UPDATE.txt in the folder with the
          shell (it is always present by default for convenience). You do not need to update the FW
          of the programmer every time you start the shell "manic".

          Comment

          • nabilgo
            Badcaps Veteran
            • May 2016
            • 299
            • L.A

            #6
            Re: vertyanov jig v3.1

            Originally posted by alfredodinolfo
            hi,
            my vertyanov sio programmer don't work.
            FTDI is ok but push reset button don't work.
            3V3 is present on Altera and Atmega328, clock is present, on pushreset button only 0.241V, no short on Altera.


            Any suggestion?
            Hi pls can u send me the software link

            Comment

            Related Topics

            Collapse

            • valente222
              HP 14 LA-A993P REV 1.0, identify ic? and not susp# present
              by valente222
              I have a Mb LA-A993P REV 1.0 computer, I am guiding myself with these two shared boards. ;
              there are some ICs that are not the same, in this case those of the PU1501 (JD4TB) and PUH1 (NF4SA) images.
              n, please identify.

              330mA of consumption after 8 seconds turns off. +3VALW AND +5VALW present, EC_RSMRST# , LID_SW# , EC_ON# , ACIN# present.


              SUSP# NOT PRESENT, which would be this the problem does not turn on sub-sources Any leakage?

              I also notice that in the PLH2 coil that belongs to +1.05VS according to the drawings I am not sure,
              ...
              06-27-2024, 06:11 PM
            • air_chair256
              Lenovo Yoga 9I 15IMH5, MB LC40CM Won't Turn On, 1V_VCCGT is not present
              by air_chair256
              Hello,

              I have a Lenovo MB LC40CM 19863-1 when press button is pushed the keyboard backlight turns on and off twice and the power button light keeps blinking and the fans spins for a few seconds and stops then again spins and stops (Three times) then laptop turns off. no image on screen. sometime when you leave it for few days it will turn on and work but once you restart it won't turn on.

              Tried to reball RAM 1,2,3,4
              Checked all voltages on big coils all present except 1V_VCCGT is not present I get 0V on this rail. is this voltage should be present once power button...
              02-13-2024, 06:00 AM
            • javieromex
              Dell G15 5511 LA-K452P won't turn on
              by javieromex
              Hello, any help will be apprecited!
              • Model: Dell G15 5511
              • MB: LA-K452P
              • Issue: Won't turn on at all, no leds, no keyboard light, no fan spin, nothing happens when pressing power button. NOTHING.
              • Customer reported it was turned off and left plugged in during the night and thats it...
              • No signs of liquid damage or burned components.
              Link to Schematics -> https://www.badcaps.net/forum/troubl...la-k452p-gdp50

              I have checked so far:

              ...
              04-17-2025, 12:44 PM
            • Prott
              Surface Pro 7 - SLP_S4 present, then gone
              by Prott
              Hello fellow Badcappers,
              I have a problem with stubborn Surface Pro 7. I narowed it down to disappearing SLP_S4# (gone after around 200 ms).

              Everything else works as it should (the whole power on sequence succesfully finishes, all the voltages are present) until this signal goes missing - with it missing the AND gate causes ALL_SYS_PWRGD to go back low and this makes VCCIN drop to 0 V as well. Interestingly the SLP_S4_DRV# signal from SAM is still present for a second, even after SLP_S4 is no longer there. I wonder what could either cause PCH to stop sending the signal or what...
              12-03-2023, 06:11 PM
            • lapfix
              Lenovo IdeaPad 3 NM-C961.no display
              by lapfix
              Hello everyone.
              lap and motherboard : IdeaPad 3-15IGL05 Laptop - Type 81WQ
              NM-C961.
              Behaviour : connect charger it power on automatically ,reach 0.170 amp than down to 0.74 amp...no display.
              with battery connected it reach 980 amp than 870 ...no display
              No short ; no corrision no intervention before.
              Try 2 differents bios versions same behaviour.

              Some measuremets :
              PL 1600 = 5valw present
              pl 1100 = 3 vlalw present
              pl 100 = 0.221 v without battery and when battery connected 7.8 volt
              pl 6602 = 1.2 v
              pl 6603 = 1.056v...
              05-29-2025, 05:01 AM
            • Loading...
            • No more items.
            Working...