HP Elitebook X360 1030 G3 BIOS and EC unlock request

[minhdigital]

Serial Number: 5CD9093BCM

Send to you

[bogdanval77]

Hello. I just bought an HP i5 G5 laptop with a password bios because I paid less money for it. I tried to remove the password from the bin file, but the rcunlocker is limited to 16 mb. The bios file is 32 MB. Please if you can help me! Thankyou.

[Vesko356]

What exactly is "HP i5 G5"?!
Read the rules before posting
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST NOT:

• Hijack threads unrelated to your request

You MUST:

• Post under a related thread if it exists
• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[adobe szk]

Hello everyone, recently I ran into a problem after flashing the BIOS on my laptop using a file from the official HP website. The file I downloaded installed normally without any errors, but after rebooting, my laptop stopped turning on and the NumLock key on the keyboard keeps blinking 6 times.

I bought a programmer and made a backup of the BIOS firmware, which I’ll attach below. I also downloaded BIOS dumps from other users with a clean ME region to test, but the NumLock key still blinks 6 times.

It’s possible that I did something wrong, or maybe the issue is that I only flashed one BIOS chip (32 MB) and didn’t touch the EC chip. I’m asking for help with my BIOS.

[peste]

Hello everyone, recently I ran into a problem after flashing the BIOS on my laptop using a file from the official HP website. The file I downloaded installed normally without any errors, but after rebooting, my laptop stopped turning on and the NumLock key on the keyboard keeps blinking 6 times.

I bought a programmer and made a backup of the BIOS firmware, which I’ll attach below. I also downloaded BIOS dumps from other users with a clean ME region to test, but the NumLock key still blinks 6 times.

It’s possible that I did something wrong, or maybe the issue is that I only flashed one BIOS chip (32 MB) and didn’t touch the EC chip. I’m asking for help with my BIOS.

post S/N, full name and model, motherboard model, product number,etc.
post both bios..

[adobe szk]

post S/N, full name and model, motherboard model, product number,etc.
post both bios..

HP EliteBook x360 1030 G3. S/N - 5CD9026B4D , 32 mb bios chip -winbond W25Q256JVEQ , 16 mb EC chip -winbond 25Q128JVPQ . I use CH341A Programator and AsProgrammer app.

[adobe szk]

HP EliteBook x360 1030 G3. S/N - 5CD9026B4D , 32 mb bios chip -winbond W25Q256JVEQ , 16 mb EC chip -winbond 25Q128JVPQ . I use CH341A Programator and AsProgrammer app.

i already create dump. i don`t need it now.