-
Please read the updated rules https://www.badcaps.net/forum/troubl...ore-posting​ and post the laptop serial numberLeave a comment:
-
Can same one clear this one password?
I having touble with firmware versions.
A1708, board 820-00840-A
FVFYH24BHV2H
Thank's.Leave a comment:
-
-
-
Re: A1708 820-00840-a efi lock
Yes i tried clean me but i am not good im not sur if i did it right
C17TT064HV22
(bios need)Leave a comment:
-
Re: A1708 820-00840-a efi lock
Post the serial number.Have you tried cleaning the ME firmware
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570
.Leave a comment:
-
Re: A1708 820-00840-a efi lock
Hello any help clean me i have this (Error: Detected CSE Extension 0x03 with wrong Partition Hash at FTPR > FTPR.man!...Leave a comment:
-
-
Re: A1708 820-00840-a efi lock
Hello! can anyone please remove EFI lock in my bios?
Model A1708
board code: 820-00840-aLeave a comment:
-
Re: A1708 820-00840-a efi lock
Hello, I have tried your contribution and collaboration, it no longer has efi lock but when installing mac os ventura it tells me that the license is not valid and presents an error, could you please help me...Attached FilesLast edited by SMDFlea; 09-08-2023, 04:08 PM.Leave a comment:
-
-
-
-
Hi everyone!
I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.
I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...06-27-2025, 08:54 AM -
Hi guys, i have a problem , my bios resets disabled overclocking lock setting to enable after reboot, please tell me which function can be responsible for restoring the stock config for this option, loading parameters from nvram and so on, like bios ,protection, from asus. My bios made me angry) Set default parameter to disable in amibcp 5 , doesn't help(
1. I made overclocking lock disabled the default in amibcp
2. I changed the varoffset to the wrong one, but it led to the programmer, it was very tedious and nervous, I really regretted it, my chip is on the back of the...03-31-2023, 01:30 PM -
HP Elitebook 855 G8
Product ID:4X5S2PA#ABG
Motherboard M53301-601.
Hi Gurus, I am wondering if someone might be able to help. I purchased recently this used computer that otherwise looks in mint condition. I worked for 1 week, until one morning I shut down the computer using the power off commands in windows. There was no warranty. This was purchased for my teenager for use at school.
When I went to start the computer up in the afternoon, all the keys lit, but the computer didn't POST. Then the next thing I tried (pressing the power button) resulted in only the... -
Hi. Sorry because my bad english. I bought a receiver (vsx-920). If i plug the unit in the ac outlet, i hear that a relay clicks, hdmi led blinks, after relay click again. Then i power up the unit. Unit is powering on. But if i press any button or rotate input selector or volume on the screen write PANEL LOCK. I able to use the main on/off and the zone on/off. Anything else is PANEL LOCK. I have remote, but no reaction from unit if i press any button on remote. Yet i searched internet and found a software or via telnet i am able to disable the key lock and the remote lock. But to use software... -
Hello guys
i have a problem with the Lenovo LEGION Y530-15ICH (NM-B701) laptop, it turns on with no display, i do have a caps lock and number lock LED, they are working fine, of which i believe the machine is booting fine...but still nothing on the screen, i loaded a new dump file, virgin one from the webiste, still doing the same thing, when i connect the external display still i get no display but Caps lock and number locking are working, checked all the neccesary voltages i have them,maybe im missing something please assist, cam it be the GPU maybe. im now lost please assist...
Leave a comment: