Alienware M14x R2 bios password

[Styro]

I hate to be that guy to bother about this, but I see this thread is recent enough for me to ask.
I have a service tag BJW2VZ1, for an Alienware 14 laptop with an Admin password that will not reset for crap (even shorting the two pads near one of the large BGA ICs did not work when the schematic said it would reset the password... Must've meant system bios password and not admin bios password).

hardware1 Would you be willing to help out? Sorry for the bother...

[peste]

I hate to be that guy to bother about this, but I see this thread is recent enough for me to ask.
I have a service tag BJW2VZ1, for an Alienware 14 laptop with an Admin password that will not reset for crap (even shorting the two pads near one of the large BGA ICs did not work when the schematic said it would reset the password... Must've meant system bios password and not admin bios password).

hardware1 Would you be willing to help out? Sorry for the bother...

post full name and model, motherboard model,etc.

[Styro]

post full name and model, motherboard model,etc.

Model: P39G
Reg Type NO: P39G001

System Disable:
[7977AD447699B8E4]

Model motherboard (According to Speccy)
07MJ2Y

Bios Version A12, but I can downgrade to as low as A06 if needed.

Please let me know if additional info is needed.
Thanks!

[hardware1]

Please let me know if additional info is needed.
Thanks!

Try this Password:

66358731

Remember to use CLTR+ENTER instead of ENTER.

[Styro]

Try this Password:

66358731

Remember to use CLTR+ENTER instead of ENTER.

Hey that worked, thanks!! Idk how you guys do it but I'm very grateful.

Also, strangely, hitting Ctrl + Enter inputted an extra character, and hitting Enter after that failed to unlock the bios.
But putting in the code and hitting enter regularly without ctrl worked. I'm not sure what's going on there why it put in an extra character but regardless, that password worked.
Thanks again!

[hardware1]

Hey that worked, thanks!! Idk how you guys do it but I'm very grateful.

Also, strangely, hitting Ctrl + Enter inputted an extra character, and hitting Enter after that failed to unlock the bios.
But putting in the code and hitting enter regularly without ctrl worked. I'm not sure what's going on there why it put in an extra character but regardless, that password worked.
Thanks again!

You're welcome.