eMachine 355-N571G32lkk PAV70 LA-6421P

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kalilinux25
    Badcaps Legend
    • Mar 2018
    • 2089
    • ZAMBOANGA SIBUGAY

    #1

    eMachine 355-N571G32lkk PAV70 LA-6421P

    Hi I badly needed this bios of the board I accidentally erased its bios
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india

    #2
    Re: eMachine 355-N571G32lkk PAV70 LA-6421P

    There are two types of bios. Try one by one.
    Attached Files

    Comment

    • kalilinux25
      Badcaps Legend
      • Mar 2018
      • 2089
      • ZAMBOANGA SIBUGAY

      #3
      Re: eMachine 355-N571G32lkk PAV70 LA-6421P

      Originally posted by mcplslg123
      There are two types of bios. Try one by one.
      I thinks there is no bin file inside the folder sir

      Comment

      • Nightwalker813
        Member
        • Mar 2016
        • 19
        • Russian Federation

        #4
        Re: eMachine 355-N571G32lkk PAV70 LA-6421P

        Originally posted by kalilinux25
        I thinks there is no bin file inside the folder sir
        fd file is good. If you want bin? just rename it to ****.bin. Thats all

        Comment

        • mcplslg123
          Badcaps Legend
          • Jun 2015
          • 7262
          • india

          #5
          Re: eMachine 355-N571G32lkk PAV70 LA-6421P

          @nightwalker813 has said it all. All programmer supports .fd file.

          Comment

          • kalilinux25
            Badcaps Legend
            • Mar 2018
            • 2089
            • ZAMBOANGA SIBUGAY

            #6
            Re: eMachine 355-N571G32lkk PAV70 LA-6421P

            Originally posted by mcplslg123
            @nightwalker813 has said it all. All programmer supports .fd file.

            Thanks the laptop now is up and running thanks to all

            Comment

            Related Topics

            Collapse

            • stormy1777
              19v accidentally applied to 12v PCB/board
              by stormy1777
              Friends,
              It appears I've accidentally applied 19VDC to a PCB that should only run 12VDC.
              The board now does not power on, even with 12VDC..
              Using a thermal camera shows entire board remains COLD except one component (near power plug) that heats to 120C and higher!!

              Suspected component is marked with "T" (slanted) and "BE", think/hope it is some kind of fuse, in photo just ABOVE the green power terminals and LEFT of the 16V capacitor (on right of photo)

              Interesting part is measuring continuity across that component shows 0-reistance...
              07-25-2025, 02:44 AM
            • harp
              help with graphics driver for eMachine G725
              by harp
              I am trying to find graphics driver for old laptop eMachine G725, for winxp 32bit... from data on internet, https://gadgetaz.com/Laptop/eMachines_G725--1942 it will have Intel GMA 4500MHD graphics, so I downloaded a few of them but nothing work, error say: this computer does not meet the minimum requirements for installing the software. So, please somebody help me to find bare minimum graphics driver to see non deformed screen anymore...
              07-02-2025, 01:26 AM
            • gsmtim
              Lenovo X1 Yoga Gen5 Accidentally MEC1663 FW Erase Can't Boot
              by gsmtim
              Hi guy's anyOne Have full backup for Lenovo X1 Yoga Gen5 MEC1663 because i accidentally Erase the main FW and EEPRom. i only have backup the Main FW , but i try to Rewrite the 256MB and 288MB but the machine Can't boot, only Charging Indicator and 3blink to power button

              Model # : Lenovo ThinkPad X1 Yoga Gen 5
              Board # : GX4A0/GYG50 NM-C881 REV 1.0
              Serial # : PF-2W2P5H
              Type # :20UC-S1L21H
              06-05-2025, 07:22 AM
            • Danghaibang
              Acer AN515-57, Recovering Thunderbolt Controller After Erasing Firmware on UT3 SPI ROM of Intel® JHL8040R Retimer
              by Danghaibang
              Hello everyone,

              About a year ago, I accidentally erased the firmware on the SPI ROM of a Thunderbolt retimer in my computer, mistaking it for the main BIOS chip. Since then, the Thunderbolt controller no longer appears in Device Manager, and I'm unable to use Thunderbolt functionality.

              For context, my system has two retimers: UT5 and UT3. The one I erased is the UT3, which uses a W25Q80DVSSIG chip. In an attempt to fix this, I used a CH341A programmer to copy the ROM data from the UT5 retimer to the UT3, hoping it would restore functionality. Unfortunately, this didn't...
              03-22-2025, 08:56 PM
            • chunter2
              HP ENVY 15-j030eb BIOS/firmware request
              by chunter2
              I've got an HP ENVY 15 Model 15-j030eb that I had originally flashed with the wrong BIOS. I was able to get a CH341a and flash it back but in the process accidentally erased the wrong chip. So, I'm looking for the firmware/BIOS for the Pm25LD512 chip which I think relates to the power management since it's right beside an IT8527E chip.

              Thanks
              06-04-2025, 04:04 AM
            • Loading...
            • No more items.
            Working...