Need Bios Dump for casper a15ya rev.1.2 25q64
casper a15ya rev.1.2 please dump
Collapse
X
-
Re: casper a15ya rev.1.2 please dump
https://www.badcaps.net/forum/showth...ighlight=a15ya
https://www.badcaps.net/forum/showth...ighlight=a15ya
Related Topics
Collapse
-
by cristy72Heloo. I need good dump for Orion CLB22RT500d . My dump is corrupt , continous restart .
Mainboard is T.SIS231.31 , with 25q64 eeprom .
Display : T215B1-P01-L05
I atached here corrupted dump .
Thanks in advance !...11-18-2024, 11:19 AM -
I have read previous remarks on another post requesting same thing.
Someone was kind enough to forward there attachments. However, those attachments bricked my printer. I only installed the 25Q64 and left 25Q16 alone. Or should i do BOTH bios's....
Needless to say, what other software tricks can i use. I did try computer USB direct link to flash BIOS firmware update and well again bricked the printer.
Yes i did make a backup...
Any advice would be great if an experience on this printer can be given, Thanking you. -
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by ugura09CASPER 926W - 900W MONİTÖR DUMP
MAG LP917W DUMP
200-100d985g-ah...-
Channel: Troubleshooting Computer Displays
12-20-2022, 12:38 AM -
-
by ali0606Hello everyone. Unfortunately, it is very difficult to find this in many sources on the internet.
Available on most paid sites. I am sharing these for you by pulling them from original working computers.
The 15YA bios version works on all PCs, it is the version used only on the card with USB 3.0, which is the upper version of the 15HC model, but it works without any problems on the card with A15HC nvidia GPU. Other versions are the UMA version that fits with Nvidia gpu and OB vga or with Nvidia gpu canceled.
The only difference is that the A15YA version requires...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment