-
-
Re: Remove_SMM... UEFI.
not working the sysytem is hang after 2ecComment
-
-
Re: Remove_SMM... UEFI.
Hi, please need to unlock lenovo yoga x390Last edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Re: Remove_SMM... UEFI.
Hello, i have here two locked T540p.
Both locked with bios pw.
Can anyone help me with unlock?
from one images attached.Last edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Re: Remove_SMM... UEFI.
I am tryring to unlock a L560 also got som L570, L580 for later tests.
My progeress so far, Modded the bios with the BootOption and the LenovoTranslateService (the no password one from this forum). I get into the bios fine, when i got to Password menu and try to disable the "Supervisor Password" it promts me for a key, HWID: 8673466 and wll not accept any key. I will look to mod the LenovoTranslateService myself but im not to good in IDA and cant really disassemble the BIOS in any meaningfull way( maybe I need some IDA plugins) anyway, did anyone have a keygen that I can use in the meantime?
I will appreciate it alot if anyone took the time to help.Comment
-
-
Re: Remove_SMM... UEFI.
Can you unlock mine too ? I tried myself but it does not accept key and freezes
.
I got a L570 and a L580 bios if anyone wanner try with the newer gen.
Much appreciated.Last edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Re: Remove_SMM... UEFI.
help to unlock it helix 20cgLast edited by SMDFlea; 04-01-2023, 07:27 AM.Comment
-
Joe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
Last edited by SMDFlea; 04-01-2023, 07:27 AM.Joe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
Re: Remove_SMM... UEFI.
Thank you for the patch, could you expand on a bit on the process on modding the bios ?
Okay a bit of feedback here, this modded bios did do its magic
, but now after I have flashed the old original bios back, it will not boot it just sits with black screen and no fan, no sound, should I clean the ME region or do something else before flashing the old bios back ?
Comment
-
Hi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.
For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent... -
Hi guys.
I am very new to this business and i have some questions. Maybe someone can help me further.
I have a 2015 Intel NUC NUC6i3SYH and for some internet and office the computer works perfectly. Lately it has been bugging me a bit on and off. Then I saw there is a UEFI update from Intel and I thought if I put it on, the problems might be gone, but unfortunately the update didn't go through. The screen stayed black and after waiting for a while nothing happened, I had to pull the plug at some point. Of course, the NUC then failed to boot!
... -
Hi, I would appreciate your help with the following problem.
I have a Fujitsu laptop AH562 witn a BIOS-UEFI problem since I converted the HDD to a SSD. For more details on the paltop go to the following link:
http://support.fujitsupc.com/CS/Port...srch=TECHSPECS
After copying the HDD to SSD with ALtiris utility provided with the Kingston SSD and replacing the HDD with the SSD the laptop went into a startup loop with no screen display and only the disk LED flashing twice per second. I waited for approximatly 2h and then stopped the laptop... -
I'm stumped with this one; it was a dropoff freebie. Blank hard drive, uefi/gpt booting from USB to install OS, never gets to installer startup screen.... Win10 21H2 BSOD with stopcode 0xc000021a. BIOS settings are what they should be; legacy boot off, secureboot off. Firmware updated to latest version (A28).
It will UEFI boot & install mint 21 just fine. Will also legacy boot & install win7 and win10 just fine as well...just won't USB UEFI boot to the 10 installer...no clue as to why!
System: Precision T1650
CPU: Xeon E3-1220V2
RAM: 16GB PC3-10600U... -
Hi there, recently my kid decided to mess with the uefi, don't even know how he got there and incredibly placed an Administrator Password (What's new!!!!). Of course now he doesn't know what he typed in, result, as soon as laptop boots up a password is asked. Now, I've been working with computers all my life, but my knowledge about this new UEFI chips is very limited. I've taken it out and with a rom programmer I can see a bunch of stuff in it. Does anyone know the location where the passwords are stored?
The UEFI Chip is a Gigadevice GD25B64C and the orginal rom dump is attached.
...
Comment