100% working dump
ASUS K52F - V2.0 tested and working dump
Collapse
X
Related Topics
Collapse
-
by DynaxSCHi,
I have an really very weired issue with ASUS ROG STRIX B550-I GAMING.
Some NVME (PCIe) SSD's are not working correctly in the second M.2 socket. An example of it is the SAMSUNG SSD980 1TB NVME SSD.
Some other NVME (I have only smaller ones) disk do work without any problem, also SAMSUNG disks, eg an MZVPV128HDGM-0000.
The behaviour is also really very strange, i.e.:- The disk shows always up in BIOS - so it is recognized, so far so good
- POST-ing with this disk with fresh Windows 24H2 installation (done in the M.2_1 socket) in the M.2_2 socket
-
by rheyntauCAN ANY ONE HELP ME WITH THIS PROBLEM....ASUS C202SA CHROMEBOOK TOUCHPAD NOT WORKING AFTER INSTALL WINDOWS 10 ..IT WAS ELAN TOUCHPAD..I DOWNLOAD A DRIVER BUT ITS NOT WORKING IT SAYS "WINDOWS FOUND DRIVERS FOR YOUR DEVICE BUT ENCOUNTERED ERROR.....THE HASH FOR THE FILE ISNOT PRESENT INTHE SPECIFIED CATALOG......."
-
by FedorovVMSI Alpha 15 B5EEK-237XRU SN:K2209N0193161
Came without initialization. Before that, it was not under repair. With BIOS from the official website, there is a start Ok, after a while the fans gain speed and the laptop turns off.
The cooling system is cleaned, the contact spot is good.
I need a working dump from laptop to check.
This is an original, not working dump....-
Channel: BIOS Requests ONLY!
03-10-2024, 07:26 PM -
-
by Kambi13Hi there need some advise. I have an Asus N550JV-CN102H with board N550JV Re2.1 suddendly started to behave weird, with almost no keys working on keyboard, opening random stuff, touchpad also working weird
Nothing has been spilled. Tought, well keyboard has gone bad, ordered a replacement one, installed it, and to my surprise the issue remains the same....
I'm wondering if the EC has gone Bad. Updated Bios also, but with no avail.... Does anyone knows if ITE IT8585E/FX has to be programmed? -
by korsar86Asus X512FF (X512FLC) REV 3.1
Help to find the KBC dump for this model.
The laptop works. but there is a problem, after power off it no longer responds to the power button, that is, you have to reset the battery and it turns on again (autostart).
There is also no keyboard backlight and the touchpad does not work.
The multicontroller is responsible for controlling these functions. Before I replace it, I would like to flash it first. thank you
Attached is a picture of the sticker and the native dump....-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment